New Holland L316
![](/assets/Uploads/NHCE-L316-2021.jpg)
Features
Meet your challenges head-on with 300 Series skid steer loaders from New Holland. The L316 is designed to make your workday more productive and comfortable with noteworthy dump height and reach, swift cycle times, and time-saving travel speeds.
POWERFUL PERFORMANCE, FAST CYCLE TIMES, SMOOTH OPERATION
New Holland Tier 4 Final engines use less fuel while still delivering powerful 60 HP (45 kW) performance to the L316. The reliable hydraulic system delivers fast cycle times, raising in just 3.2 seconds and lowering in only two seconds. In-line hydraulic pumps produce less noise and provide extra-smooth operation. Add the optional Ride Control and Self Level to make those long work days easier and more productive.
SAVE TIME BETWEEN JOBSITES
The dual-range transmission on the L316 provides standard low-range travel speeds of nearly 8 mph (12.7 kph) and 139 lbs/ft (188 Nm) @1800 rpm of peak torque power to save time on and between job sites. New Holland’s long 37-inch (941 mm) wheelbase gives you stability and smooth riding comfort. Newly available creep mode on EH models provides greater control for slow-speed operations like trenching.
DUMP HEIGHT AND REACH
The L316's radial lift linkage provides a maximum 84.8 inches (2154 mm) of dump height and a maximum 18.5 inches (469 mm) in dump height reach, allowing you to precisely place loads in the center of high-sided truck boxes or hoppers.
EASY ACCESS, SIMPLIFIED SERVICE
Long service intervals and easy access to maintenance points reduce downtime and lost revenue. All daily service points are grouped together and the rear door and hood make it easy to access without tools. The entire cab and boom assembly tilts forward for unrivaled entry to components and easy cab cleanout.
Specifications
MODEL | L316 |
Overall operating height | |
Overall operating height with foundry/excavating bucket short lip (in. (mm)) | 141.4 (3591) |
Overall operating height with low profile/standard lip bucket (in. (mm)) | 146.9 (3732) |
Overall operating height with low profile extended/long lip bucket (in. (mm)) | 152 (3859) |
Height to | |
Bucket hinge pin (in. (mm)) | 112 (2845) |
Height to Top of ROPS (in. (mm)) | 75.5 (1919) |
Bottom of level bucket, fully raised (in. (mm)) | 105.6 (2682) |
Overall length | |
Overall length without attachment with coupler (in. (mm)) | 95.9 (2435) |
Overall length with foundry excavation bucket on ground (in. (mm)) | 119.2 (3028) |
Overall length with low profile bucket (in. (mm)) | 125 (3175) |
Overall length with low profile extended bucket (in. (mm)) | 129.8 (3297) |
Dump | |
Dump angle (degrees) | 40 |
Dump height with foundry/excavating bucket short lip (in. (mm)) | 88.4 (2246) |
Dump height with low profile/standard lip bucket (in. (mm)) | 84.8 (2154) |
Dump reach (max height) (in. (mm)) | 18.5 (469) |
Maximum attachment rollback | |
Bucket on ground (degrees) | 26 |
Bucket at full height (degrees) | 95 |
Wheelbase and clearance | |
Wheelbase (in. (mm)) | 37 (941) |
Ground clearance (bottom of belly pan) (in. (mm)) | 7 (178) |
Angle of departure (degrees) | 22 |
Clearance circle | |
Clearance circle without bucket (in. (mm)) | 48.8 (1240) |
Clearance circle with foundry bucket in carry position (in. (mm)) | 73.3 (1862) with 60" (1524 mm) bucket |
Clearance circle with low profile bucket on ground (in. (mm)) | 78.5 (1994) with 60" (1524 mm) bucket |
Clearance circle with extended low profile on ground (in. (mm)) | 83.1 (2112) with 60" (1524 mm) bucket |
Clearance circle rear (in. (mm)) | 56.4 (1433) |
Rear axle to bumper (in. (mm)) | 33.8 (858) |
Tread width (in. (mm)) | 49.2 (1248) with 10" x 16.5" (254 x 419 mm) tires |
Overall width (in. (mm)) | 59.8 (1518) |
Engine | |
Manufacturer/model | ISM / N844LT |
Type | Diesel 4-stroke, T, I.D.I. |
Cylinder | 4 |
Bore/stroke (in. (mm)) | 3.31 x 3.94 (84 x 100) |
Displacement (in.³ (L)) | 135.2 (2.216) |
Fuel injection | Indirect |
Fuel | #2 Diesel |
Fuel filter | Pre-filter spin on @ 14 microns Main-filter spin on @ 10 microns |
Cooling | Liquid |
Air intake | Turbocharged with external EGR |
Engine speeds | |
High idle - no load (rpm) | 2825 +/- 25 |
Rated - full load (rpm) | 2800 |
Low idle (rpm) | 1200 +/-50 |
Horsepower per SAE J1349 | |
Gross Horsepower (hp (kW)) | 60 (45) @ 2800 rpm |
Net Horsepower (hp (kW)) | 57 (42) @ 2800 rpm |
Peak torque (lb.-ft. (Nm)) | 139 (188) @ 1800 rpm |
Drive pump mechanical | |
Pump to engine ratio | 1:01:00 |
Displacement (in.³ (cm³)) | 2.14 (35) |
Flow (gpm (Lpm)) | 25.1 (95) |
Charge pressure (psi (bar)) | 360 (25) |
System relief (psi (bar)) | 5000 (345) |
Control | Direct mechanical |
Drive pump electro hydraulic | |
Pump to engine ratio | - |
Displacement (in.³ (cm³)) | - |
Flow (gpm (Lpm)) | - |
Charge pressure psi (bar) | - |
System relief (psi (bar)) | - |
Control | - |
Drive motors | |
Max displacement (in.³ (cm³)) | 19.83 (325) |
Speed @ high idle engine (rpm) | 313 |
Speed @ optional high speed (rpm) | _ |
Torque @ max displ. and relief pressure (lb.-ft. (Nm)) | 1315 (1783) |
Travel speed with spec tires | |
Low range (mph (kph)) | 7.9 (12.7) |
High range (optional) (mph (kph)) | _ |
Final drive | Single-reduction chain drive |
Drive chain | |
Size | ASA #80 |
Axles | |
Diameter in (mm) | 2 (50.8) |
Length (in. (mm)) | 13.2 (346) |
Parking brake | |
Type | Spring applied, hydraulic release multiple disk |
Engagement | Depress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine |
Pumps | |
Type | Gear |
Displacement standard aux. (in.³ (cm³)) | 1.52 (24.9) |
Displacement high flow aux. (in.³ (cm³)) | _ |
Pump flow (gpm (Lpm)) | 18.4 (69.7) |
Optional high flow (gpm (Lpm)) | _ |
Enhanced high flow (gpm (Lpm)) | - |
Loader control valve | |
Type | 3 Spool / open center / series |
Relief pressure (psi (bar)) | 3046 (210) |
Enhanced high flow relief pressure (psi (bar)) | - |
Hydraulic filter | 4 microns / spin on |
Lift cylinder | |
Bore diameter (in. (mm)) | 2.25 (57) |
Rod diameter (in. (mm)) | 1.38 (35) |
Stroke (in. (mm)) | 25.4 (645) |
Closed length (in. (mm)) | 38.9 (989) |
Bucket cylinders | |
Bore diameter (in. (mm)) | 2.5 (63.5) |
Rod diameter (in. (mm)) | 1.38 (34.9) |
Stroke (in. (mm)) | 14.6 (370) |
Closed length (in. (mm)) | 23.4 (594) |
Weights | |
Operating weight (lbs. (kg)) | 5645 (2560) |
Shipping weight (lbs. (kg)) | 5210 (2370) |
Service Capacities | |
Fuel tank (gal. (L)) | 16 (60.5) |
Engine oil with filter (qt. (L)) | 7.5 (7.1) |
Chain tanks (per side) (qt. (L)) | 6.6 (6.25) |
DEF tank (gal. (L)) | - |
Hydraulic system | |
System capacity with filter (qt. (L)) | 30.9 (29.2) |
Rated operating load | |
50% tip (lbs. (kg)) | 1600 (725) |
Tipping load (lbs. (kg)) | 3200 (1455) |
Breakout forces | |
Lift cylinder (lbs. (kN)) | 3160 (14.1) Tip Limit |
Bucket cylinder (lbs. (kN)) | 4180 (18.6) |
Cycle times | |
Raise (seconds) | 3.2 |
Lower (seconds) | 2 |
Dump (seconds) | 1.8 |
Roll back (seconds) | 1.3 |