New Holland C345
![](/assets/Uploads/NHCE-C345-Y24.jpg)
Features
POWER THROUGH TOUGH JOBS
The reliable hydraulic system of the C345 delivers fast cycle times, raising in just 5.1 seconds and lowering in only 3.5 seconds, in addition to producing less noise and providing extra-smooth operation due to in-line hydraulic pumps. New Holland Tier 4 Final engines deliver powerful performance, use less fuel, are easy to maintain - decreasing operating costs - and still deliver powerful 90 HP (67 kW) performance to the C345.
SMOOTH RIDE, EXTENDED LIFE
The low-profile track undercarriage of the C345 that provides 9.6 inches (244 mm) of ground clearance makes cleanout a breeze, reduces noise and increases durability. The loader also yields a smoother ride with 64.5 inches (1639 mm) of track on ground, thanks to steel-embedded tracks rolling on the rubber instead of steel. Fewer moving parts than competitive designs mean less complexity and complications, all adding up to longer track life.
LIFT AND CARRY OPERATIONS
The vertical lift linkage delivers up to 31.6 inches (802 mm) of dump height reach and a maximum dump height of over 100 inches (2568 mm) to precisely place loads in the center of high-sided truck boxes or hoppers. With a full rated operating load of 9,000 lbs (4091 kg), 4,500 lbs (2045 kg) at 50% tip and 3,150 lbs (1432 kg) at 35% tip, the C345 is optimized for lift-and-carry operations, allowing operators to load material with precision and confidence.
8” LCD MULTIFUNCTION DISPLAY MAKES OPERATION EASIER
The LCD display with an integrated back-up camera helps you operate a 300 Series loader with greater ease and confidence. At 8 inches in size and mounted conveniently on the right forward post, the LCD display puts all the information and tools for greater productivity right where you need it. The display provides key operation data, including engine and performance information, RPM, fuel level, battery voltage, hydraulic oil temperature, engine temperature, and trip screen. The integrated backup camera increases visibility to the rear of the loader, improving operator efficiency and safety. You can set the camera for “always on” or to engage only when shifting the loader into reverse gear.
WIDE, COMFORTABLE CAB WITH SUPERIOR VISIBILITY
New Holland 300 Series loaders make comfort a priority to boost productivity on the job. More comfort starts with the cab itself, one of the widest in the industry, so it's easy to enter and exit. Full-covering trim absorbs noise, and the visibility panel on the cab roof gives you a clear view in all directions, even to the raised bucket or attachments. The fully sealed and pressurized cab minimizes dust and exhaust infiltration. Seat choices include the optional suspension seat or the heated, composite air-ride seat for maximum support and ultimate comfort. An optional, factory-installed lap bar is offered on all 300 Series models. All loader models also feature an optional 8-inch LCD display with integrated rear camera, Bluetooth radio (satellite-radio ready) and a USB port.
EASY ACCESS, SIMPLIFIED SERVICE
Hassle-free access on 300 Series compact track loaders makes daily service and maintenance that much easier. The rear door and hood provide straightforward service access for periodic maintenance and daily checkpoints. Access engine oil, fuel fill, hydraulic oil, coolant and radiator points without tools, and clean the radiator from either side. If ever needed, the entire cab can be tilted forward for unrivaled access to components and easy cab cleanout.
Specifications
MODEL | C345 |
Overall operating height | |
Overall operating height with foundry/excavating bucket short lip (in. (mm)) | 161.4 (4100) |
Overall operating height with low profile/standard lip bucket (in. (mm)) | 165.6 (4207) |
Overall operating height with low profile extended/long lip bucket (in. (mm)) | 170.4 (4329) |
Height to | |
Bucket hinge pin (in. (mm)) | 131.6 (3342) |
Top of ROPS (in. (mm)) | 80.4 (2043) |
Bottom of level bucket, fully raised (in. (mm)) | 123.2 (3129) |
Overall length | |
Overall length without attachment with coupler (in. (mm)) | 120.2 (3054) |
Overall length with foundry excavation bucket on ground (in. (mm)) | 144.6 (3673) |
Overall length with low profile bucket (in. (mm)) | 148.8 (3781) |
Overall length with low profile extended bucket (in. (mm)) | 153.7 (3904) |
Dump | |
Dump angle (degrees) | 45.3 |
Dump height with foundry/excavating bucket short lip (in. (mm)) | 104.1 (2645) @ 45° |
Dump height with low profile/standard lip bucket (in. (mm)) | 101.1 (2568) @ 45° |
Dump reach (max height) (in. (mm)) | 31.6 (802) @ 45° |
Maximum attachment rollback | |
Bucket on ground (degrees) | 32 |
Bucket at full height (degrees) | 83.1 |
Track and clearance | |
Track on ground (in. (m)) | 64.5 (1639) |
Ground clearance (bottom of belly pan) (in. (m)) | 9.6 (244) |
Angle of departure (degrees) | 32 |
Clearance circle | |
Clearance circle without bucket (in. (mm)) | 57.7 (1465) |
Clearance circle with foundry bucket in carry position (in. (mm)) | 88 (2234) with 78" (1981 mm) bucket |
Clearance circle with low profile bucket on ground (in. (mm)) | 91.8 (2331) with 78" (1981 mm) bucket |
Clearance circle with extended low profile on ground (in. (mm)) | 96.2 (2444) with 78" (1981 mm) bucket |
Clearance circle rear (in. (mm)) | 67.9 (1725) |
Track gauge (in. (mm)) | 58.6 (1488) |
Overall width (in. (mm)) | 76.5 (1943) |
Engine | |
Manufacturer/model | FPT / F5BFL413E*B002* |
Type | Diesel 4-stroke, turbo, D.I. |
Cylinder | 4 |
Bore/stroke (in. (mm)) | 3.9 x 4.3 (99 x 110) |
Displacement (in.³ (L)) | 207 (3.4) |
Fuel injection | HPCR Direct |
Fuel | #2 Diesel |
Fuel filter | Pre-filter 99.8% @ 30 microns, Main filter 95% @ 4 microns |
Air intake | Turbocharged Aftercooled with external EGR and SCR |
Cooling | Liquid |
Engine speeds | |
High idle - no load (rpm) | 2500 +/- 25 |
Rated - full load (rpm) | 2500 |
Low idle (rpm) | 1150 +/- 25 |
Horsepower per SAE J1349 | |
Gross HP | 90 HP (67 kW) |
Net Horsepower (hp (kW)) | 84 (63) @ 2500 rpm |
Peak torque (lb.-ft. (Nm)) | 282 (383) @ 1400 rpm |
Drive pump electro hydraulic | |
Pump to engine ratio | 1:01:00 |
Displacement (in.³ (cm³)) | 2.75 (45) |
Flow (gpm (Lpm)) | 29.4 (111) |
Charge pressure (psi (bar)) | 360 (24.5) |
System relief (psi (bar)) | 5220 (360) |
Control | Mechanical or Electro hydraulic |
Drive motors | |
Effective Max displacement (in.³ (cm³)) | 3.10 (50.9) |
Effective Displacement opt high speed (in.³ (cm³)) | - |
Speed @ high idle engine (rpm) | 103 |
Speed @ optional high speed (rpm) | 156 |
Torque @ max displ. and relief pressure (lb.-ft. (Nm)) | 4654 (6310) |
Travel speed | |
Low range (mph (kph)) | 5.5 (8.9) |
High range (mph (kph)) | 8.0 (12.9) |
Final drive | Planetary gearbox with 2-speed motor |
Parking brake | |
Type | Spring applied, hydraulic release disc |
Engagement | Depress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine |
Undercarriage | |
System | Zig Zag Pattern |
Idlers / rollers per side | 2/4/2024 |
Ground pressure | |
PSI (bar) (with spec belt) | 4.4 (0.30) |
Pumps | |
Type | Gear |
Displacement standard aux. (in.³ (cm³)) | 2.23 (36.6) |
Displacement high flow aux. (in.³ (cm³)) | 1.45 (23.7) |
Standard pump flow (gpm (Lpm)) | 24.2 (91.5) |
Optional high flow (gpm (Lpm)) | 39.9 (150.8) |
Enhanced high flow (gpm (Lpm)) | 35 (132.5) |
Loader control valve | |
Type | 3 spool / open center / series |
Standard relief pressure (psi (bar)) | 3,450 (237) |
Enhanced high flow relief pressure (psi (bar)) | 4000 (276) |
Hydraulic filter | 6 microns / spin on |
Lift cylinder | |
Bore diameter (in. (mm)) | 2.75 (69.8) |
Rod diameter (in. (mm)) | 1.75 (44.5) |
Stroke (in. (mm)) | 35.7 (908) |
Closed length (in. (mm)) | 53.9 (1369.1) |
Bucket cylinders | |
Bore diameter (in. (mm)) | 3.0 (76.2) |
Rod diameter (in. (mm)) | 1.5 (38.1) |
Stroke (in. (mm)) | 15.9 (405) |
Closed length (in. (mm)) | 24.3 (617) |
Rated operating load | |
50% tip (lbs. (kg)) | 4500 (2045) |
35% tip (lbs. (kg)) | 3150 (1432) |
Tipping load (lbs. (kg)) | 9000 (4091) |
Breakout forces | |
Lift cylinder (lbs. (kN)) | 7562 (33.6) |
Bucket cylinder (lbs. (kN)) | 9188 (41.8) |
Cycle times | |
Raise (seconds) | 5.1 |
Lower (seconds) | 3.5 |
Dump (seconds) | 2.7 |
Roll back (seconds) | 2 |
Weights | |
Operating Weight | 10,610 lbs (4813 kg) |
Shipping weight (lbs. (kg)) | 10,267 (4657) |
Service Capacities | |
Fuel tank (gal. (L)) | 25.5 (96.5) |
Engine oil with filter (qt. (L)) | 8.9 (8.5) |
System Capacity with filter (qt. (L)) | 45.4 (48) |
DEF tank (gal. (L)) | 2.8 (10.7) |
Lift Style | |
Lift design |