New Holland Durabine™ 416 PLUS
![](/assets/Uploads/NH-Durabine416Plus-21.jpg)
Features
Windrower Headers
A CUT ABOVE THE REST
Productivity is more than how many acres you cut – it’s also dry down time. Durabine™ PLUS Series disc headers and Haybine® HS Series sickle headers are designed to take advantage of faster speeds found on Speedrower® PLUS windrowers without compromising cutting and conditioning quality.
DURABINE™ PLUS DISC HEADERS
CLEAN AND CLOSE CUTTING
To maximize productivity, the all-new MowMax™ II PLUS true modular cutterbar delivers a cleaner cut. Longer knives extend each module’s cutting diameter by nearly 1 inch (25.4 mm) and turn with a tip speed of 171 mph (275 kph) at 2300 rpm on the Durabine 413 PLUS and 195 mph (314 kph) at 2600 rpm on the Durabine 416 PLUS and 419 PLUS, which is 14 mph (22 kph) faster than the previous series (181 mph (291 kph)). For better crop-to-knife engagement, the cast rock guards were reshaped. To improve cutting in light- or late-season crops, the profile of the cutterbar was lowered by bringing the discs closer to the cutterbar with new low profile ShockPRO™ hubs. Along with the longer knives, this design is more productive in down and tangled crops as the cutting height was lowered nearly 30%, leaving less uncut crop behind.
HAYBINE® SICKLE HEADERS
PROVEN CUTTING AND CONDITIONING PERFORMANCE
Since 1964 when New Holland introduced the industry’s first combined mower-conditioner, the Haybine® name has been associated with impeccable cutting performance, fast drying, and time-tested reliability. Three sizes are available with cutting widths of 14’ 3” (4.34 m.), 16’ 3” (4.95 m), and 18’ 3” (5.56 m). For clean cutting performance, dual counter-stroking sickles feature a timed modular wobble drive that assures smooth cutting with minimal vibration and maintenance. Over-serrated knives slice quickly at 1800 rpm as the fully adjustable five-bat reel consistently feeds crop into the 20-inch (508 mm) auger. Fast dry down is the result of 102-inch (2591 mm) wide chevron-pattern intermeshing rubber or steel rolls that use a proven torsion-bar roll-pressure system to apply constant pressure.
SPECIALTY HEADERS
GRASS SEED HARVESTING CONFIGURATION
The Durabine 416 PLUS Specialty Grass Seed Harvesting head delivers high-capacity performance in delicate crops that do not require conditioning, like grasses, flower seeds, and mint. A unique auger features flighting that tapers as it approaches the center of the head, with no paddles, supports, or conditioning rolls. A flexible lean bar in the front assists tall crop flow into the head, without sudden impacts that could shatter delicate seedpods. A second curtain hanging above the cutterbar improves crop flow. In the back, windrow-forming rods gently direct crop into a windrow ready for harvesting.
Specifications
Dimensions & Weights | |
MODEL | Durabine™ 416 PLUS |
Cutting width ft. in. (m) | 16' 3" (4.95) |
Overall width ft. in. (m) | 16' 7" (5053) |
Weighting with conditioning system lbs. (kg) | 5114 (2319) |
Weight less conditioning system lbs. (kg) | – |
Durabine PLUS MowMax™ II PLUS Cutterbar | |
Cutting width ft. in. (m) | 16' 3" (4.95) |
Cutting height range in. (mm) | 0.5-3.3 (13 - 86) |
Cutting angle | 0 to -10 degrees |
Number of discs | 10 |
Maximum disc speed rpm | 2600 |
Number of reversible | swing-away knives |
Knife tip speed mph (kph) | 195 (314) |
Flotation | Hydraulic adjustment from cab |
ShockPRO™ Disc Drive Protection System | Standard |
3-Year MowMax Factory Cutterbar Warranty | Standard |
Haybine Cutterbar | |
Cutting width ft. in. (m) | – |
Cutting height range in. (mm) | – |
Cutting angle | – |
Type | – |
Knives | – |
Guards | – |
Skid shoes | – |
Drive type | – |
Speed spm | – |
Stroke in. (mm) | – |
Haybine Reel | |
Type | – |
Adjustments | – |
Mechanical drive rpm | – |
Hydraulic drive (optional) rpm | – |
Speed adjustment (mechanical) | – |
Diameter in. (mm) | – |
Drive type | – |
Tine bars | – |
Bushings / bearings* in. (mm) | – |
Auger | |
Auger diameter in. (mm) | 20 (508) |
Auger type | Floating |
Conditioning Systems | |
Roll types | Chevron-pattern rubber or steel |
Roll length in. (mm) | 102 (2591) |
Roll diameter in. (mm) | 10 .16 (258) |
Roll speed rpm | 938 |
Roll pressure | Hand crank |
Roll gap | Adjustable stop-bolt |
Roll drive | Spur gearbox and PTOs |
Windrow/swath width in. (mm) | 38 to 96 (965 to 2438) |
* Bearing with collar at cam end. Bushings at all other locations.