New Holland DuraDisc™ 108M
![](/assets/Uploads/NH-DuraDisc108M.jpg)
Features
DuraDisc™ Heavy-Duty Disc Mowers
DEPENDABLE, CLEAN CUTTING WITH TIME-SAVING CONVENIENCE
Forage quality directly influences livestock weight gain and milk production. Maximize the return of your hay field with improved forage quality and tonnage by choosing the clean, uniform cut that begins at the MowMax™ cutterbar of New Holland DuraDisc™ heavy-duty disc mowers. By cutting closely and cleanly, DuraDisc mowers leave less crop behind to increase tonnage with every cutting to boost weight gain, milk production, and ultimately the profitability and success of your operation.
MOWMAX™ DISC CUTTERBAR
DURABILITY, CLEAN CUTTING, LESS DOWNTIME.
You can depend on rugged DuraDisc™ disc mowers to slice through tough conditions, mow smoothly and quickly, and give you the peace of mind you only get with the MowMax™ cutterbar.
PULL-TYPE DURADISC 210M
INCREASED PRODUCTIVITY WITH BUILT-IN CONFIDENCE.
The New Holland heavy-duty DuraDisc™ 210M pull-type disc mower combines the benefits of a wide 10-foot, four-inch cut with easy hookup and a low horsepower requirement.
MOUNTED MODELS
FAST, SMOOTH MOWING IN THREE SIZES
You can depend on rugged DuraDisc™ mounted disc mowers to slice through tough conditions and mow smoothly and quickly.
Choose from three mounted models:
- DuraDisc™ 107M - 5 discs - 6’8” cutting width
- DuraDisc™ 108M - 6 discs - 7’10” cutting width
- DuraDisc™ 109M - 7 discs - 9’2” cutting width
Specifications
DuraDisc™ 108M | |
Cutterbar | |
Cutting width ft. in. (m) | 7'10" (2.4) |
Cutting height in. (mm) | 1.25-3.5 (32-89) |
Cutterbar tilt angle degrees | 0 to -10 |
Cutterbar operating range degrees | +18 to -30 |
Breakaway angle degrees | 30.5 |
Cutterbar flotation | Vertical adjustable spring |
Type cutterbar | MowMax™ cutterbar, modular, with individual sealed reservoirs |
Number of discs | 6 |
Knives per disc | 2 |
Disc cutting diameter in. (mm) | 19.7 (500) |
Disc drive | Bevel gears in sealed modules |
Disc speed RPM | 3000 |
Cutterbar gear protection | Std. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splines |
Swath width, approx standard* in. (mm) | 94 (2388) |
Swath width with optional swathboards* in. (mm) | 62 (1575) includes LH & RH swathboards |
Cutterbar | |
Cutting width ft. in. (m) | 7'10" (2.4) |
Cutting height in. (mm) | 1.25-3.5 (32-89) |
Cutterbar tilt angle degrees | 0 to -10 |
Cutterbar operating range degrees | +18 to -30 |
Breakaway angle degrees | 30.5 |
Cutterbar flotation | Vertical adjustable spring |
Type cutterbar | MowMax™ cutterbar, modular, with individual sealed reservoirs |
Number of discs | 6 |
Knives per disc | 2 |
Disc cutting diameter in. (mm) | 19.7 (500) |
Disc drive | Bevel gears in sealed modules |
Disc speed RPM | 3000 |
Cutterbar gear protection | Std. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splines |
Swath width, approx standard* in. (mm) | 94 (2388) |
Swath width with optional swathboards* in. (mm) | 62 (1575) includes LH & RH swathboards |
Driveline | |
Minimum PTO horsepower required hp (kW) | 55 (40.9) |
Input speed RPM | 540 |
PTO shaft spline/size required | 6-spline / 1-3/8" |
Driveline protection | Belt drive to cutter bar |
Overrunning clutch | Standard |
Belt tension | Spring-loaded tensioner with adjustment gauge |
Hydraulics and Hitch | |
Hydraulic circuits required | One remote |
Minimum relief pressure required psi (bar) | 1500 (103) |
Hitch | Category II quick hitch compatible |
Dimensions and Weight | |
Overall width in. (mm) | 160.25 (4070) |
Overall length in. (mm) | 50.5 (1283) |
Height - transport position** in. (mm) | 119.5 (3035) |
Weight, operating lb. (kg) | 1405 (639) |
Maximum transport speed | - |
Tires/wheels | - |
DuraDisc™ 108M | |
---|---|
Cutterbar | |
Cutting width ft. in. (m) | 7'10" (2.4) |
Cutting height in. (mm) | 1.25-3.5 (32-89) |
Cutterbar tilt angle degrees | 0 to -10 |
Cutterbar operating range degrees | +18 to -30 |
Breakaway angle degrees | 30.5 |
Cutterbar flotation | Vertical adjustable spring |
Type cutterbar | MowMax™ cutterbar, modular, with individual sealed reservoirs |
Number of discs | 6 |
Knives per disc | 2 |
Disc cutting diameter in. (mm) | 19.7 (500) |
Disc drive | Bevel gears in sealed modules |
Disc speed RPM | 3000 |
Cutterbar gear protection | Std. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splines |
Swath width, approx standard* in. (mm) | 94 (2388) |
Swath width with optional swathboards* in. (mm) | 62 (1575) includes LH & RH swathboards |
Cutterbar | |
Cutting width ft. in. (m) | 7'10" (2.4) |
Cutting height in. (mm) | 1.25-3.5 (32-89) |
Cutterbar tilt angle degrees | 0 to -10 |
Cutterbar operating range degrees | +18 to -30 |
Breakaway angle degrees | 30.5 |
Cutterbar flotation | Vertical adjustable spring |
Type cutterbar | MowMax™ cutterbar, modular, with individual sealed reservoirs |
Number of discs | 6 |
Knives per disc | 2 |
Disc cutting diameter in. (mm) | 19.7 (500) |
Disc drive | Bevel gears in sealed modules |
Disc speed RPM | 3000 |
Cutterbar gear protection | Std. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splines |
Swath width, approx standard* in. (mm) | 94 (2388) |
Swath width with optional swathboards* in. (mm) | 62 (1575) includes LH & RH swathboards |
Driveline | |
Minimum PTO horsepower required hp (kW) | 55 (40.9) |
Input speed RPM | 540 |
PTO shaft spline/size required | 6-spline / 1-3/8" |
Driveline protection | Belt drive to cutter bar |
Overrunning clutch | Standard |
Belt tension | Spring-loaded tensioner with adjustment gauge |
Hydraulics and Hitch | |
Hydraulic circuits required | One remote |
Minimum relief pressure required psi (bar) | 1500 (103) |
Hitch | Category II quick hitch compatible |
Dimensions and Weight | |
Overall width in. (mm) | 160.25 (4070) |
Overall length in. (mm) | 50.5 (1283) |
Height - transport position** in. (mm) | 119.5 (3035) |
Weight, operating lb. (kg) | 1405 (639) |
Maximum transport speed | - |
Tires/wheels | - |
– Not available
Note: Recommended for use with tractors having a fully enclosed cab
* Heavy swaths may fluff out to a wider swath after exiting the swathboard(s)
** Transport height is based on hitch pins being 24 in. (609 mm) above ground on DuraDisc 107M model and 18 in. (457 mm) above ground on DuraDisc 108M and 109M