Call UsNew Holland Discbine® 209
Discbine® Side-Pull Disc Mower-Conditioners Discbine® 209
Overview:
CUTTING WIDTH FT. IN. (M)
9’ 2” (2.8)
NUMBER OF DISCS
7
Features
Discbine® Side-Pull Disc Mower-Conditioners
QUALITY AND SPEED IN A 9’2” AND 10’4” MACHINE
The new Discbine® 209 and Discbine® 210 disc mower-conditioners help you make the very highest-quality hay, and help you keep more of it. They cut crop closely, cleanly and quickly, and condition it uniformly for faster drydown, preserving nutrients.
MOWMAX™ DISC CUTTERBAR
MOW FAST AND DRY FAST - BALE SOONER
When the weather forecast is just right, it’s time to mow. Often the perfect haymaking window threatens to close without warning. You can’t control the weather but you can choose the tools that help you work quickly. Discbine® models with the MowMax™ disc cutterbar offer fast mowing and smooth uniform crop flow to the conditioner that can help open your haymaking window.
QUICKMAX™ BLADE CHANGE SYSTEM
SAVE TIME AND MOW BETTER WITH THE QUICKMAX™ KNIFE CHANGE SYSTEM
When you use sharp knives, you get a smooth finish, add tons to your harvest and improve the cut quality of future cuttings. With the QuickMax™ system, a special knife tool allows you to change bent or dull knives in less time than getting out of the tractor, so you save time and crop.
CONDITIONING ROLLS OR LEANINGEDGE™ FLAILS
FAST CROP DRYING WITH THREE FLEXIBLE, WIDE-DRY™ CONDITIONING CHOICES.
Whether you’re mowing alfalfa, clover, orchard grass, timothy, bermuda grass, bahia, grass, fescue, cereal rye, forage wheat or oats, the Discbine® 209 and Discbine® 210 harvest crops quickly and produce nutritious, high-value feed using your choice of conditioning systems. Both hay mowers give you the choice of gentle, effective conditioning with rubber chevron-intermeshing or LeaningEdge™ flail tines for fast grass hay drying. The model Discbine 210 offers the added choice of steel chevron-intermeshing rolls. No matter the system, each offers fast, infinite adjustments to conditioning intensity to match crop and weather conditions.
HITCH AND TONGUE
GET MOWING FAST
New Holland’s standard Discbine 209 and 210 hitches attach fast with a traditional hitch pin, PTO shaft, a lighting plug, and always just two remotes. NO complicated hitch extensions here. When the sun shines it’s time to make hay, so hook up and get to mowing.
Specifications
| Discbine® 209 | |
| Cutterbar | |
| Cutting width ft. in. (m) | 9' 2" (2.8) |
| Cutterbar model | MowMax™ Modular Cutterbar with ShockPRO™ hubs |
| Number of discs | 7 |
| Knives per disc | 2 |
| Disc speed @ 540 rpm PTO speed rpm | 3000 |
| Tilt angle degrees | 2° - 10° |
| Flotation | Up & back, adjustable springs |
| Drive method | PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar |
| Cutting height in. (mm) | 1.1-2.7 (29-68) |
| Cutting height w/optional high-stubble shoes in. (mm) | 2.25-4.5 (58-115) |
| Cutting height w/optional adjustable shoes in. (mm) | 2.25-4.5 (58-115) |
| Roll Conditioners | |
| Type | Chevron intermeshing rubber |
| Length / Diameter in. (mm) | 90 (2286) / 10.4 (264) |
| Drive method | 4 HB V-belt and enclosed gears |
| Speed rpm | 647 |
| Conditioner roll tension adjustment | Single crank |
| Conditioner gap adjustment | Adjustable drawbolt stop, each end |
| LeaningEdge Flail Conditioners | |
| Type | Flail rotor with 90 tapered flails |
| Length / Diameter in. (mm) | 90 (2286) / 22 (560) |
| Drive method | 4 HB v-belt |
| Speed rpm | 718 std. 1000 opt. |
| Conditioner gap adjustment | Single crank adjustable rotor hood |
| Crop Discharge | |
| Swath width ft. (m) | 6 (1.83) |
| Windrow width ft. (m) | 3-6 (0.9-1.83) |
| Driveline | |
| Input speed rpm | 540 |
| Driveline protection | Slip clutch and overrunning clutch assembly at rear of PTO shaft |
| Secondary driveline | Non-CV driveline |
| Tongue Options | |
| Type | Side-pull, straight tongue |
| Hitch type | Drawbar with CV PTO |
| Tractor Requirements | |
| Minimum PTO power required hp (kW) | 65 (49) |
| Hydraulic circuits required | 2 |
| Minimum relief pressure required psi (bar) | 1500 (103) |
| Drawbar | ASAE Category II |
| Swivel Hitch - Drawbar | — |
| Swivel Hitch - 2-Point | — |
| Electrical | 7-pin electrical connector for transport lights |
| Tires | |
| Tubeless ag rib implement tires | 9.5L x 14L 6PR |
| Transport Speed | |
| Max road speed mph (kph) | 20 (32) |
| Dimensions* | |
| Width, transport ft. in. (m) | 9' 11" (3.02) |
| Width , operating ft. in. (m) | 14' 10" (4.52) |
| Length, transport ft. in. (m) | Flail Tine: 18' 1'' (5.50)*** or Roll: 17' 7'' (5.23)*** |
| Length, operating ft. in. (m) | Flail Tine: 17' 8'' (5.4)*** or Roll: 17' 2'' (5.23)*** |
| Height ft. in. (m) | Transport: 5' 8" (1.73) / Operating: 4' 5" (1.35) |
| Ground clearance with head fully raised in. (mm) | 17 (4.32) |
| Weights** | |
| Operating weight lbs. (kg.) | Flail Tine: 3690 (1674)*** / Roll: 3740 (1697)*** |
— Not Available
*** Rear curtain down for all height and length measurements on machines with flail conditioners. Subtract 2” (50.8 mm) for flail curtain up. Windrow shields fully open for length in both positions.
*** Weights with rubber conditioning rolls. Add 100 lbs. (45 kg) for steel rolls.
*** Weights & dimensions are with standard drawbar hitch. Add 150 lbs. (68 kg) & 2 ft. (.60) length for swivel hitch models.
