Land Pride PFS8010

New Products / Land Pride / Seeders / PFS Series Spreaders / PFS8010

Double tap to zoom

Features
Specifications

Features

FEATURES	BENEFITS
High hopper capacities	Able to cover large areas between hopper refills.
Low profile hoppers	Low filling height. Easy to fill.
Drive unit is without gears or hydraulic motors	Provides simple maintenance.
One piece hopper molded of fiberglass or polyethylene	Plastic construction to eliminate corrosion. Seamless for accurate and consistent emptying.
Parts in direct contact with product are constructed of non corrosive materials	Helps eliminate corrosion of parts.
Spreading capacity	Highly productive at 44 to 890 lbs. per acre.
Pendulum type broadcast	Provides even spreading and controlled coverage up to 50 ft. effective spreading width. Pendulum system insures that the material is always spread the same on left and right side.
Two position pendulum angle	Allows to increase or decrease spreading width.
Heavy-duty tubular frame	Supports hopper weight with optional extensions when full.
Tow hitch	Good for pulling a trailer loaded with product to fill the spreader or pulling a drag harrow. (Not available with PFS8010 model.)
540 RPM shielded PTO	For added safety.
Standard Plastic pendulum spout	Protects from corrosive material to enhance longevity. Optional spouts are constructed of stainless steel to enhance longevity.
Variable adjustable gate	Provides for precision control of discharge rate.
Stainless steel gate	Protects from corrosive material enabling gate to operate smoothly.
Plated adjustment levers	Protects from corrosive material to enhance longevity.
PFS4000 with Cat. I 3-point hitch PFS5060 with Cat. I & II 3-point hitch PFS8010 with Cat. II 3-point hitch	For attachment to a wide range of tractors.
Optional Agitator Kit	Helps keep light fluffy material from bridging. (Not available on the PFS4000 model.)
Optional Hydraulic Gate Kit	Allows the operator to open and close the discharge gate hydraulically on the go. (Not available on the PFS4000 model.)
Optional Hopper Extensions Kit	Increases hopper capacity. (Not available on the PFS4000 model.)

Specifications

Model Number	PFS8010
Horsepower @ 540 rpm required to power drive unit only.	6 hp
Hitch type	3-Point Cat. II
Capacity * Without hopper top extension With optional hopper top extension With larger optional hopper top extension	30 cu ft / 2,040 lbs 37 cu ft / 2,522 lbs 44 cu ft / 2,998 lbs
Weights ** Without hopper top extension With optional hopper top extension With larger optional hopper top extension	403 lbs 419 lbs 425 lbs
Overall width	75"
Overall length	53.2"
Overall height / Loading height Without hopper top extension With optional hopper top extension With larger optional hopper top extension	38" 42" 47"
Tow hitch capacity	Not Available
Delivery type	Pendulum
Pendulum construction	Plastic spout
Working height (End of pendulum)	29 1/2"
Effective spread width (min.-max.)	2'-4" to 46'-0" Depending on spout, material and power take-off speed at 540 rpm.
Power take-off speed	540 rpm
Drive unit	1 3/8" shaft with 1:1 ratio
Hopper material	Square hopper constructed of seamless fiberglass
Frame construction and finish	Steel welded tubular frame with baked-on epoxy finish
Adjustment levers	Plated
Agitator Extension Kit	Optional
Hydraulic Gate Kit	Optional
Hopper Extension Kit	Optional
Ground coverage per hour 20 ft Effective spread width 26 ft Effective spread width 32 ft Effective spread width 40 ft Effective spread width 45 ft Effective spread width	7.3 to 17 acres/hr. traveling at 3 to 7 mph. 9.5 to 22 acres/hr. traveling at 3 to 7 mph. 11.6 to 27 acres/hr. traveling at 3 to 7 mph. 14.5 to 34 acres/hr. traveling at 3 to 7 mph. 16.7 to 39 acres/hr. traveling at 3 to 7 mph.