Land Pride SC2572

New Products / Land Pride / Rotary Cutters / SC25 Series Skid Cutters / SC2572

Double tap to zoom

Features
Specifications

Features

Features	Benefits
Medium volume motor @ 18-23 gpm High volume motor @ 24-30 gpm	Customer can chose one of two optional motors (medium and high volume) for his SC2572 cutter. This allows the cutter to fit a wide variety of Skid Steers. Also the deck can be upgraded to a different motor when owner upgrades his Skid Steer
Case drain	Protects gearbox
1/4" Side panels for overall reinforcement	Protects sides from debris being thrown against them from the blades.
Front and rear chain shields	Single chain on the front and double chain on the rear. Reduces flying debris.
Replaceable skid shoes (optional)	Protect side plate structure. Shoes are replaceable for convenience.
Splined blade bar	Allows for tight positive fit of stump jumper and blade bar to motor output shaft.
3/16" Round stump jumper	Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
1/2" x 4" Heat-treated free swinging blades	Heat-treated blades offer longer life. Free swinging blades protect from obstructions.
2" Diameter cutting capacity	Can aid in clearing brush.
SC2572 blade tip speed	Medium volume motor = 14,199 fpm at 23 gpm. High volume motor = 15,707 fpm at 30 gpm.
Offset hitch (8 1/2" to the right)	Allows the operator to cut close to obstacles on the right side.
Optional front gauge wheel	Provides easy operation and handling over uneven terrain, laminated tire can't go flat.
Polycarbonite door (optional)	Protects operator from thrown objects.
Floating hitch mounting plate	Allows smoother travel over rough terrain with the optional gauge wheel easing the fatigue put on the operator.
Motor pressure gauge	Allows the operator to ensure that the motor is operating at proper psi.
Lift limit safety chain	Provides additional operator protection from flying objects by allowing the Rotary Cutter to only be lifted up to 18".

Specifications

Model Number	SC2572
Cutter weight without skid shoes, gauge wheel, & protective door	1098 lbs (498.0 kg)
Gauge wheel weight (Optional)	129 lbs (58.5 kg)
Skid shoe weight (Optional)	Standard skid shoes = 10 lbs (4.5 kg) Heavy-duty skid shoes = 21 lbs (9.5 kg)
Protective door weight (Optional)	10 lbs (4.5 kg)
Hitch	Universal floating-hitch mounting plate. Hitch plate can be mounted centered on the deck or mounted to offset the deck to the right 8 1/2" (21.6 cm).
Cutting width	72" (1.83 m)
Overall width	78" (1.98 m)
Overall length	91" (2.31 m)
Cutting height	1 1/2" to 18" (3.8 cm to 45.7 cm) infinitely variable.
Cutting capacity	2" (5.1 cm) Diameter
Gearbox oil capacity & lubrication	6 Pints (2.84 L) of EP 80-90 wt. gearlube
Spindle hub oil	Does not apply
Low volume drive motor	11-17 gpm (41.6-64.4 lpm) flow
Medium volume drive motor	18-23 gpm (68.1-87.1 lpm) flow
High volume drive motor	24-30 gpm (90.8-113.6 lpm) flow
Hydraulic pressure	1500 to 3500 psi (10.34 to 24.13 MPa)
Deck thickness	10 Ga. (3.4 mm)
Side skirt construction	1/4" (6 mm) Steel
Deck wear protection (Optional)	Optional four corner mounted skid shoes.
Skid shoes construction (Optional)	Standard-duty skid shoes = 1/4" x 2" (6 mm x 5.1 cm) steel Heavy-duty skid shoes = 3/8" x 3" (1 cm x 7.6 cm) steel
Dishpan	Heavy duty round pan stump jumper.
Blade size	1/2" x 4" (1.3 cm x 10.2 cm) updraft.
Blade rotation	Clockwise
Blade Bolt	1 1/8"-12 x 3 7/16" with key.
18-23 gpm motor blade tip speed 24-30 gpm motor blade tip speed	14.199 fpm at 23 gpm 15,707 fpm at 30 gpm
Front deck protection	Single row chain guard.
Rear deck protection	Double row chain guard.
Deck lift height protection	Safe chain limiter.
Cutting height gauging (Optional)	Pivoting and adjustable front mounted gauge wheel with laminated tire.