Land Pride RCR2672 / NOT AVAILABLE

New Products / Land Pride / Rotary Cutters / RCR2660 & RCR2672 Series Rotary Cutters / RCR2672

Double tap to zoom

Features
Specifications

Features

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
110 HP gearbox	A rugged heavy built gearbox capable of handling heavy cutting applications.
Cat. 4 drive-line with 4 plate slip-clutch	Excellent gearbox protection with the slip-clutch slipping when encountering obstruction in the blade path. Standard slip-clutch offers convenience over shear-bolts.
Cat. l or ll 3-point hitch	Allows use on a wider variety of tractors.
Lower clevis type 3-point hitch	Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck construction	Can withstand more abuse than lighter gauge decks.
1/4" Side panels for overall reinforcement	Also protects sides from debris being thrown against them from the blades.
Fully welded deck	Robotically welded. Adds additional strength and reduces rust.
Extended front tapered deck	Contains and discharges material better.
Round back design	Allows for more efficient handling and dispersing of material.
9" Deck Height	Allows cutter to handle heavy cutting conditions.
2" to 12" Cutting height	Provides for a wide range of cutting conditions.
High cutting capacity	Can cut brushy areas with saplings up to 3".
Full length skids with replaceable shoes	Full length skids protect side plate structure, replaceable shoes for convenience.
1/2" x 4" Heat-treated free swinging blades	Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar	Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" Round stump jumper	Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
High blade tip speed	60" =12,384 fpm and 72" = 14,861 fpm
3" Dia. cutting capacity	Can aid in clearing brush.
Rugged laminated tail-wheel	Can't go flat. Choice of single or dual combination.
Chain or rubber shield option	Located on front and rear. Reduces flying debris.

Specifications

Model	RCR2672
Machine Weight (with Chain Guards)	1046 lbs
Hitch	Category l or ll Quick Hitch Compatible with Floating Top Link, Quick Hitch Ready
Cutting Width	72"
Overall Width	79"
Overall Length (Including Tail-wheel)	123"
Deck Height	9 1/8" (Bottom of Deck to Bottom of Skid Shoe)
Cutting Height	2" - 12"
Cutting Capacity	3"
Recommended Tractor HP	35-130 maximum
PTO Speed	540 rpm
Gearbox	540 rpm PTO Driven Gearbox 1:1.46 Speed-Up Beveled Gears Cast Iron Housing
Gearbox Lubrication Capacity & Type	7 pints of 80-90W EP oil
Gear box Input/ Output Shaft Size	Input Shaft = 1 3/8" - 6 Spline Output Shaft = 2" Dia.
Deck Construction	All welded construction
Deck Material Thickness	10 Gauge
Side Panel Thickness	1/4"
Skids	Replaceable
Stump Jumper	Round Pan 3/16" x 30 1/2"
Blades (2)	1/2" x 4" x 29" Heat Treated Alloy Steel Free-Swinging High Lift
Blade Bolt	Keyed with harden flat washer and lock nut
Blade Tip Speed	14,861 fpm/788rpm
Drive-line	ASAE Category 4
Drive-line Protection	4 Plate Slip Clutch
Tail-wheel Mount Assembly	Welded arm and Caster Fork
Tail-wheel	4.00 x 8 x 15 Laminated Tire with cast iron hub and tapered roller bearings
Front Guard	Optional: Chain Guard Available through Parts Department: Rubber Guard
Rear Guard	Optional: Chain Guard