Land Pride RCR1860

New Products / Land Pride / Rotary Cutters / RCR18 Series Rotary Cutters / RCR1860

Double tap to zoom

Features
Specifications

Features

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
Cat. 3 driveline with shear-bolt	Shear-bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch	Slip-clutch driveline offers convenience for continual work.
Dual position clevis type 3-point floating top link	Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links.
Lower clevis type 3-point hitch	Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck construction	Can withstand more abuse than lighter gauge decks.
Box tubing deck support	Makes for a stronger rigid deck
Fully welded deck	Robotic welded. Adds additional strength.
Extended cutter front	For increased material flow and added protection.
Round back design	Helps discharge grass better than enclosed or partially enclosed cutters.
7 1/4" Deck height on RCR1860 8 7/8" Deck height on RCR1872	Allows cutter to handle heavy cutting conditions.
1 1/2" to 13" RCR1860 Cutting height 1 1/2" to 11 1/2" RCR1872 Cutting height	Provides for a wide range of cutting conditions.
Full length skid shoes	Provides sidewall reinforcement and full protection to bottom of sidewall.
1/2” x 3” Heat-treated free swinging blades	Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub	Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
10 Gauge stump jumper	Standard round stump jumper slides over stumps, rocks and debris.
High blade tip speed RCR1860 = 16,360 FPM RCR1872 = 14,853 FPM	Ensures clean cut.
15”Laminated tailwheel	Laminated material is long lasting in rough conditions.
4” x 16” Solid rubber tailwheel	Can’t go flat.
Heavy-duty spindle on tailwheel	Tailwheels take a beating, 1 1/4” spindle gives the strength to protect tailwheel assembly.
Guarding	Protect against flying debris. Customer must choose to include chain or rubber on the front and rear. Rear Metal Band standard.
Driveline Holder	Keeps driveline up out of dirt. Easier hook up of driveline.

Specifications

Model	RCR1860
Machine Weight	599 lbs. With laminated tailwheel, slip clutch driveline, front rubber guards and rear metal band
Hitch	Category l with floating clevis top link, Quick-Hitch ready
Cutting Width	60"
Overall Width	65"
Overall Length	99 3/8"
Deck Height (Bottom of Deck to Bottom of Skid Shoe)	7 1/2"
Cutting Height	1 1/2" - 13"
Cutting Capacity	2" Diameter
Recommended Tractor PTO HP	20-65 HP
PTO Speed	540 RPM
Gearbox	1:1.93 Speed-up beveled gears Cast iron housing
Gearbox Oil Capacity & Lubricant	4.5 Pints of EP 80-90W oil
Deck Material Thickness	10 Ga. (.134")
Side Skirt Material Thickness	10 Ga. (.134")
Deck Construction	All welded deck
Skid Construction	Full length welded on
Stump Jumper	Round pan 10 ga. x 24" with blade holder bar
Blades (2)	1/2" x 3" Heat treated alloy steel Free-swinging high lift - low friction
Blade Bolts	Keyed with harden flat washers & lock nuts.
Blade Tip Speed	16,363 FPM
Driveline	ASAE Category 3 shearbolt or 2-plate slip-clutch
Driveline Protection	Optional - Center shearbolt protection Optional - Center bolt 2 plate slip clutch
Tailwheel Mount Assembly	Welded A-arm and caster fork with 360 degree swivel
Tailwheel	4" x 8" x 15" Laminated tire with cast iron hub or 4" x 16" molded rubber tire
Front Guard	Optional: Rubber Belting Accessory: Chain Guard
Rear Guard	Standard: Metal Band Optional: Rubber Belting Accessory: Chain Guard