Land Pride RCR1548

New Products / Land Pride / Rotary Cutters / RCR1548

Double tap to zoom

Features
Specifications

Features

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
Cat. 3 driveline with shear- bolt	Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch	Slip-clutch driveline offers convenience for continual work.
Floating top link	Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors.
Fully welded deck	Robotic welded. Adds additional strength.
Round back design	Helps discharge grass better than enclosed or partially enclosed cutters.
Cutting Height	1" - 9" cutting height for wide range of cutting conditions.
Full length skid shoes	Provides sidewall reinforcement and full protection to bottom of sidewall.
1/2” x 3” Heat-treated free swinging blades	Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub	Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
10 Gauge stump jumper	Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed	Ensures clean cut. 42" = 11,459 fpm 48" = 13,090 fpm
Laminated tailwheel	Laminated material is long lasting in rough conditions.
Solid rubber tailwheel	Can’t go flat.
Heavy-duty spindle on tailwheel	Tailwheels take a beating, 1 1/4” spindle gives the strength to protect tailwheel assembly.
Guarding	Protect against flying debris. Customer can choose to include rubber on the front and rear.
Driveline holder	Keeps driveline up out of dirt. Easier hook up of driveline.

Specifications

Model	RDR1548
Implement weight (with front guard)	424 lbs.
Hitch	Category 1 & Category 1 limited, Quick Hitch ready
Cutting Width	47 1/2"
Overall Width	53 1/2"
Overall length Iincluding tailwheel)	91 3/4"
Deck height (Bottom of deck to bottom of skid shoe)	7 1/4"
Cutting height	1 3/4" - 11 1/2"
Cutting capacity	2" (Grass, weeds & light brush)
Recommended tractor hp	20-60 HP
Power take-off speed	540 RPM
Gearbox hp rating	65 HP
Gearbox with speed up beveled gears	540 input rpm gearbox 1:1.93 Cast iron housing
Gearbox oil capacity & lubrication	4.5 Pints of gear lube 80-90w EP
Deck construction	One piece reinforced deck
Deck material thickness	12 Gauge
Skids shoes	1/4" X 2" Weld-on
Stump jumper	Round pan 10 ga. x 24"
Blades (2)	1/2" x 3" Heat treated alloy steel Free-swinging blades
Blade bolts	Keyed with harden flat washer and lock nut
Blade tip speed	13,090 fpm
Drive-line	ASAE Category 3
Drive-line protection	Standard 1/2" center shearbolt protection Optional - Center bolt 2 plate slip clutch
Tailwheel	4" x 16" Solid rubber tire
Safety guards (Optional)	Rubber (front and rear)