Land Pride RCG3712

New Products / Land Pride / Rotary Cutters / RCG3712 & RCGM3712 Rotary Cutters / RCG3712

Double tap to zoom

Features
Specifications

Features

Features	Benefits
Surpassed rugged industry standards	All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
Factory assembled	Arrives for quick and easy set-up. Minimal time wasted setting or prepping the unit.
Rugged heavy built gearboxes	Capable of handling heavy cutting applications.
Gearbox seal protection	Gearbox bottom seal protection for longer bearing life.
2 Piece driveline shields	Driveline grease zerks are easier to access.
Low hitch weight on tractor drawbar	Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
Narrow A-frame hitch	Allows for a tighter turning radius.
Adjustable park jack angle	Park jack can be adjusted to be perpendicular to the ground.
Adjustable driveline hanger	Serves as support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor power take-off shaft.
Input driveline: Cat. 6 CV	Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
Drivelines with slip-clutches: Cat. 4 intermediate & Cat. 4 wings	Driveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles.
Zerks on end caps of cross journals	Intermediate and wing driveline cross journals are easier to grease.
High blade tip speed	Allows clean cutting of material.
6" Blade overlap	Eliminates skipping during turns.
3/16" Round stump jumper	Standard thick stump jumper material keeps damage to a minimum.
Smooth top design	Reduces accumulation of debris and is easier and faster to clean.
Top of decks are 100% welded	Makes center decks and wing decks stronger.
1/4" Sidewall thickness	Increased thickness reduces damage from objects being thrown into deck sidewalls.
Beveled skid shoes on wings	Reduces gouging the ground when turning.
LED signal lights	LED lights are bright, long lasting, and resist vibration; unlike incandescent lights.
Hinged wing sections	Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
1" Solid hinge rods	Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
Wing transport lock pins	Transport lock pins will hold wings in folded position in the event of hydraulic failure.
Enclosed dual 1" leveling rods	Cutter pulls equally on the rear axle while traveling over rough terrain.
5-Bolt hubs	5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims	Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
Spring cushioned center-axle	Protects unit from bumps and ground shock.
Replaceable individual wheel spindles	Spindles can be replaced when damaged without replacing entire axle assembly.
Wheel options	Laminated tires: Eliminates flats. Air-filled tires: Give better cushion while transporting. Foam-filled tires: Give better cushion while transporting and can’t go flat.
LP Performance hitch option	Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
Bar-tite hitch option	Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Maintenance free tongue & axle pivots	Self lubricating journal bearings make for less maintenance.
Color coded hydraulic hose handles	Easy hose identification & sturdy handle to easily connect & disconnect from tractor.
4 lip purgeable metal backed wheel hub seal	Seals make it harder for water & debris to enter the hub and grease to leave the hub. Metal backing prevents sticks and twine from destroying the seal lips.
Greasable cast steel continuous hinge	Cast steel hinges make a strong connection & are easy to lubricate.
Galvanized decks on RCG models	Durable rust protection for harsh conditions

Specifications

Specifications & Capacities	RCG 3712
Horsepower range	50 - 160
Gearbox horsepower	540 rpm or 1000 rpm 160 hp Divider 130 hp Center & Wings
Gearbox lubrication	Gear Lube 80-90W EP
Gearbox oil capacity	Splitter: 3.5 pints; Center deck & Wings: 6 pints
Cutting capacity	3"
Machine total weight Drawbar vertical load	3,730 lbs. 1,240 lbs.
Blade tip speed At 540 rpm At 1000 rpm	15,500 FPM 15,700 FPM
Hitch types	Fixed Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch
Hitch jack	Standard (7,000 lbs.)
Signal lights 7 Pin connector	LED SAE J560 pin configuration
Cutting width Overall width Transport width	12'-0" 12'-10" 9’-4"
Overall length	15'-3" (With center deck raised fully up)
Deck height	11"
Cutting height	1-1/2" - 14"
Lift hydraulics	3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing hydraulics	2 1/2" x 12" hydraulic cylinders, hoses & fittings
Wing transport protection	Wing transport lock pins
Deck material thickness	10 Gauge
Side skirt thickness	1/4" Steel
Skid shoes	Wing Deck: 1 Replaceable skid shoe per wing Center Deck: 2 Replaceable skid shoes
Blades - 6 (2 per carrier)	1/2" x 4" Heat-treated, free-swinging alloy steel with uplift
Blade overlap	6"
Blade bolt	Keyed with hardened flat washer & locknut
Stump jumper / blade holder	3/16" Thick round dish shaped pan, reinforced with 1" x 4" blade bar
Front & rear guards	Optional single row chain or dual row chain
Input driveline 540 & 1000 rpm	Cat. 6 with constant velocity u-joint with or without overrunning clutch
Intermediate driveline	Standard - Category 4 with slip-clutch
Wing drivelines	Standard - Category 4 with slip-clutch
Wheel options	21" or 26" Laminated tires, 25.5" New foam filled tires, 25.5" New aircraft tires without foam filling
Number of wheels	4 - Wheel option: Two on transport axle and one on each wing axle 6 - Wheel option: Four on transport axle and one on each wing axle
Transport axle	Spring-cushioned on center transport axle
Hubs	Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts
Land Pride Performance hitch & Bar-Tite hitch pivot shaft diameter	2 1/4"
A-frame tongue	5" x 3" rectangular tubing