Land Pride RCF2060

New Products / Land Pride / Rotary Cutters / RCF2060 & RCF2072 Series Rotary Cutters / RCF2060

Double tap to zoom

Features
Specifications

Features

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
Gearbox Seal Protection	Gearbox bottom seal protection for longer bearing life.
Cat. 3 driveline with shear-bolt Option	Shear-bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Option	Slip-clutch driveline offers convenience for continual work.
Dual position clevis type 3-Point floating top link	Permits deck to follow the terrain for an even cut.
Lower clevis type 3-Point hitch	Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck & side skirt construction	Can withstand more abuse than lighter gauge decks.
Box tubing deck supports	Makes for a stronger rigid deck.
Fully welded deck	Adds additional strength.
Extended cutter front	For increased material flow and added protection.
Round back design	Helps discharge grass better than enclosed or partially enclosed cutters.
Deck Height	9 11/16" Deck height on 60" and 11" deck height on 72" model Allows cutter to handle heavy cutting conditions.
1 1/2" to 12" Cutting height	Provides for a wide range of cutting conditions.
Full length skid shoes	Provides sidewall reinforcement and full protection to bottom of sidewall.
1/2" x 3" Heat-treated free swinging blades	Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub	Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
10 Gauge stump jumper	Standard round stump jumper slides over stumps, rocks and debris.
High blade tip speed	Ensures clean cut.
15" Laminated tailwheel	Laminated material is long lasting in rough conditions. Can't go flat.
4" x 16" Solid rubber tailwheel	Can't go flat.
1 1/4" Heavy-duty spindle on tailwheel	Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
Optional Guarding	Protect against flying debris. Customer can choose to include single chain or rubber guarding on the front and back. Rear Metal Band standard on the back.
Driveline Holder	Keeps driveline up out of dirt. Easier hook up of driveline.

Specifications

Model Numbers	RCF2060
Machine Weight	620 lbs (281.2 kg) With laminated tailwheel, slip clutch driveline, Front Rubber Guards and Rear Metal Band.
Hitch	Category l with floating top linkage, Quick Hitch ready
Cutting Width	60" (1.52 m)
Overall Width	65" (1.65 m)
Overall Length	98" (2.49 m)
Deck Height (Bottom of Deck to Bottom of Skid Shoe)	9 11/16" (24.6 cm)
Cutting Height	1 1/2" to 12" (3.8 cm to 30.5 cm)
Cutting Capacity	2" (5.1 cm) Diameter
Recommended Tractor hp	20-65 hp (14.9-48.5 kw)
Power Take-Off Speed	540 rpm
Gearbox Ratio	1:1.93
Gearbox Construction	Speed-up beveled gears, cast iron housing, 1 3/8" (3.5 cm) - 6 spline input shaft and 2" (5.1 cm) output shaft
Gearbox Lubricant	EP 80-90W oil
Gearbox oil Capacity	4.5 Pints (2.13 L)
Deck Construction	All welded deck
Deck Material Thickness	10 Gauge (.134")(3.4 mm)
Side Skirt Material Thickness	10 Gauge (.134")(3.4 mm)
Skid Shoes Standard Accessory	Full length weld-on skid shoes 1/4" x 2 1/2" x 18 7/16" (6 mm x 6.4 cm x 46.8 cm) Long bolt-on replaceable skid shoes (Bolts to weld-on skid shoes)
Stump Jumper	10 GA. x 24" (3.4 mm x 61.0 cm) Round Pan with 1" (2.5 cm) thick blade holder bar
Blades (2)	1/2" x 3" x 25" (13 mm x 7.6 cm x 63.5 cm) Heat treated alloy steel free-swinging high lift
Blade Bolts	Keyed with harden flat washers & lock nuts.
Blade Tip Speed	16,363 FPM (83.1 mps)
Drive-line	ASAE Category 3
Drive-line Protection Optional Optional	Shear-bolt protection 2 Plate slip clutch
Tail-wheel Mount	Welded A-arm and caster fork with 360 degree swivel
Tail-wheel Optional Optional	4" x 8" x 15" Laminated tire with cast iron hub 4" x 16" Molded rubber tire
Front Guard Optional Optional	Rubber Belting Single Chain Guard
Rear Guard Standard Optional Optional	Metal Band Rubber Belting Single Chain Guard