Land Pride RCD1884

New Products / Land Pride / Rotary Cutters / RCD18 Series Rotary Cutters / RCD1884

Double tap to zoom

Features
Specifications

Features

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
Gearbox Seal Protection	Gearbox bottom seal protection for longer bearing life.
Cat. 3 main driveline with 2-plate slip-clutch	2-Plate slip-clutch protect driveline and gearboxes. slip-clutch is more convenient than shear bolt for continual work.
Shock absorbing flex-coupler between main and side gearboxes	Protects intermediate drive shaft and side gearbox from hard objects in the blade path.
10" Deck offset to the right	Allows the operator to cut closer to bodies of water, drainage ditches, roadways and objects such as fence lines, guard rails, buildings and trees.
Lower clevis type 3-point hitch	Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Fully welded 10 gauge deck	Fully welded deck adds additional strength to the deck. 10 Gauge decks can withstand more abuse than decks with lighter gauge.
Box tubing deck supports	Makes for a stronger rigid deck.
Round back design	Helps discharge grass better than enclosed or partially enclosed cutters.
11 5/8" Deck Height	Allows cutter to handle heavy cutting conditions.
1 1/2" to 12" Cutting height	Provides for a wide range of cutting conditions.
Skid shoes	Provides sidewall reinforcement and protection to bottom of sidewall.
1/2" x 4" Heat-treated free swinging blades	Free swinging protects from obstructions. Heat-treated offers longer life.
1/2/" x 4" Blade bar	Heavy-duty blade bar adds support to stump jumper and gearbox output shaft.
Splined blade bar hub	Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
Stump jumper	Standard round stump jumper slides over stumps, rocks and debris.
Front and rear guarding	Protect against flying debris. Optional front rubber or single chain guarding. Standard rear metal band or optional rear extended metal guarding.
Optional 15" Laminated tailwheel 4" x 16' Molded rubber	Laminated material is long lasting in rough conditions and can't go flat. Can't go flat.

Specifications

Specifications & Capacities	RDC1884 Model
Machine Weight with: Dual Laminated Tailwheels Dual Solid Tailwheels	900 lbs. 905 lbs.
Hitch	Category l with clevis type lower links and floating top linkage Quick Hitch adaptable
Cutting Width	84"
Overall Width	86 9/16"
Overall Length	80 9/16"
Offset Distance to the Right	10"
Deck Height at Rear	11 5/8"
Cutting Height	2" - 12"
Cutting Capacity	1 1/2" Diameter
Recommended Tractor Power Take-Off Horsepower	35-60 horsepower
Power Take-Off Speed	540 rpm
Gearbox	60 Hp main gearbox & 45 horsepower side gearbox With speed-up beveled gears, cast iron housing, and 1.67" output shaft
Gearbox Lubricant	EP 80-90W oil
Gearbox oil Capacity Main Gearbox Side Gearbox	4.7 pints 3.5 pints
Deck Construction	All welded deck
Deck Material Thickness	10 Gauge
Side Skirt Material Thickness	10 Gauge
Skid Shoe Construction	3/16" Weld-on with mounting holes for adding optional bolt-on replaceable shoes
Stump Jumper	10 Gauge x 24" Round dish pan with 1" x 4" x 19 1/2" blade bar
Blades (4)	1/2" x 4" x 16" Heat treated alloy steel free-swinging suction blades
Blade Overlap	5"
Blade Bolts	Keyed with harden flat washers & lock nuts.
Blade Tip Speed	11,693 fpm
Main Drive-line	ASAE Category 3
Main Drive-line Protection	2 plate slip clutch
Tailwheel Mount	Caster fork with 360 degree swivel
Tailwheel	Optional two 15" laminated tire or two 4" x 16" molded rubber tire.
Front Guard	Optional 4" x 6" molded rubber or single chain guard
Rear Guard	Standard metal band or optional metal extended guard