Land Pride RC4615

New Products / Land Pride / Rotary Cutters / RC4615 Rotary Cutters / RC4615

Double tap to zoom

Features
Specifications

Features

Features	Benefits
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
Factory assembled	Saves customer set-up time and money. Adjustments should always be made by dealer.
7 Year gearbox warranty	Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
Rugged heavy built gearboxes	Capable of handling heavy cutting applications.
Gearbox seal protection	Gearbox bottom seal protection for longer bearing life.
2 Piece shield on wing gearboxes	Driveline grease zerks are easier to access.
LP Performance self-leveling hitch	Reduces drawbar wear by keeping hitch level while going through ditches.
Low hitch weight on tractor tongue	Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
Narrow A-frame hitch	Allows for a tighter turning radius.
Adjustable park jack angle	Park jack can be adjusted to be perpendicular to the ground.
Adjustable driveline hanger	Serves as a support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to power take-off shaft.
Input driveline: Cat. 6 CV	Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
2 3/8" Output gearbox shaft	Large output shaft handles shock loads better.
Input driveline: Cat. 6 CV or Cat. 5 Conventional	Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline
Drivelines with slip-clutches: Cat. 5 intermediate Cat. 4 Wings	Driveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles.
Grease zerks on end caps of driveline cross journals	Intermediate and wing driveline cross journals are easier to grease.
High blade tip speed	Allows clean cutting of material & even distribution. See Specifications for actual FPM.
6" Blade overlap	Eliminates skipping during turns.
Left wing rotates clockwise	Better discharge of material. Picks up tractor tracks.
3/16" Round stump jumper	Standard thick stump jumper material keeps damage to a minimum.
Smooth Top Design	Allows for easy cleaning of deck.
Deck sheet tops are 100% welded	Makes center decks and wing decks stronger.
1/4" Sidewall thickness	Increased thickness reduces damage from objects being thrown into deck sidewalls.
Beveled skid shoes on wings	Reduces gouging the ground when turning.
Hinged wing section	Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
1" Solid hinge rod	Larger diameter hinge gives greater strength to cutter and hinge area.
Wing transport lock	Holds transport wing in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling rods	Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs	5-Bolt hubs makes the wheel assembly more durable and longer lasting
Drain holes in wheel rims	Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned center axle	Protects unit from bumps and ground shock, cushions loads on drawbar.
Replaceable wheel spindles	Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
Wheel options	Laminated tires: Eliminates flats. Air-filled tires: Give better cushion while transporting. Foam-filled tires: Give better cushion while transporting & can’t go flat.
LP performance hitch option	Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
Bar-tite hitch option	Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Roadway light kit option	Allows operator to transport on public roads safer.
Deck rings (optional)	Keeps blades from damaging the deck.

Specifications

Specifications & Capacities	RC4615
Horsepower range	50 - 200
Gearbox horsepower	540 rpm or 1000 rpm 250 hp Divider 210 hp Center & Wings
Gearbox lubrication	Gear Lube 80-90W EP
Gearbox oil capacity	Splitter: 5.5 pints; Center deck & Wings: 10 pints
Cutting capacity	3 1/2"
Machine weight Total weight Tongue weight	4,550 lbs. (Includes 6 Laminated tires, single chains, and no deck rings.) 1,650 lbs.
Blade tip speed At 540 rpm At 1000 rpm	Center blades = 16,300 fpm & Wing blades = 16,300 fpm Center blades = 16,288 fpm & Wing blades = 16,000 fpm
Hitch types	Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
Hitch jack	Standard (7,000 lbs.)
Cutting width Overall width Minimum transport width	15'-0" 15'-11 3/4" 7'-11 3/4"
Overall length	15'-6" (With center deck raised fully up)
Deck height	12"
Cutting height	2" - 14"
Lift hydraulics	3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing hydraulics	3" x 12" hydraulic cylinders, hoses & fittings
Wing transport protection	Wing transport Locks
Deck material thickness	10 gauge
Side skirt thickness	1/4"
Skid shoes Wing deck Center deck	1 Replaceable shoe per wing 2 Replaceable shoes
Blades - 6 (2 per Carrier)	1/2" x 5" Heat treated Free Swinging Alloy Steel with Uplift
Blade overlap	6"
Blade bolt	Keyed with hardened flat washer & locknut
Stump jumper / Blade holder	3/16" Thick round dish shaped pan, reinforced with 1" x 5" blade bar
Deck ring	Optional 3/8" x 4 1/2"
Front & rear guards	Optional single row chain or dual row chain
Input driveline	ASAE Cat. 6 with constant velocity u-joint
Intermediate driveline	Standard - Category 5 with Slip-Clutch
Wing drivelines	Standard - Category 4 with Slip-Clutch or optional Category 5 with Slip-Clutch
Wheel options	6" x 21" Laminated tires, 25.5" new tire with or without foam fill, 29" x 16 ply used aircraft tires without foam filling.
Number of wheels	6 - Wheel option: 4 on transport axle and one on each wing axle 8 - Wheel option: 4 on transport axle and two on each wing axle
Transport axle	Spring-cushioned on trailing arms
Hubs	Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
Color options	Standard color: Beige; Optional colors: Red, Green, Orange, or Yellow.