Land Pride DBM2660

New Products / Land Pride / Rotary Cutters / DB26 Series Ditch Bank Cutter / DBM2660

Double tap to zoom

Features
Specifications

Features

Features	Benefits
Tractor HP Range	Designed for 75-150 HP tractor with minimum weight of 7,000 lbs.
Gearbox HP Rating	150 HP
3 Point Design	Does not require a dedicated tractor. Three point hook up is easy to hook up and remove from tractor.
Cutter Deck Visibility	Visibility of the cutter deck is captured from the operator’s seat. Easy to see operation. Operator does not have to look behind.
Factory Assembled	Arrives ready for the customer, saves time and money. (Excluding gauge wheel options and fluids.)
Grease Ports	All grease ports are easily accessible for servicing.
10' Transport Width	Folds up close to the tractor. No weight brackets or decks hanging away from the tractor. Typically, not much wider than the tractor, which means safer transporting.
Extension Arm Design	One cylinder used to adjust extension arm horizontally 32" is easy to operate.
Long Horizontal Reach	Good access for reaching vegetation far away from the tractor.
Above Grade Vertical Reach	Good access for reaching up embankments and cutting low over hanging limbs.
Below Grade Reach	Good access for reaching down embankments.
175 Degree Deck Rotation Angle	Cutter head can be positioned to reach different angles.
Cat. 2 & Cat. 3 with Quick Hitch 540 rpm or 1000 rpm	Fits a wide variety of tractors.
35 Gallon Oil Reservoir	Large reservoir maintains optimum fluid temperatures and also serves as counterweight.
1" Cutting Capacity	Good for trimming brush.
High Blade Tip Speed	15,600 FPM tip speed means cleaner cutting.
One Parking Stand	Easy to adjust 3-point hitch level for unhooking tractor.
In-line Filter	Cleans hydraulic fluid before it re-enters the reservoir.
Shut-off Valve	Permits maintenance with minimum oil loss.
Built-in Auxiliary Weight Rack on Left Side	Suitcase weights can be added to left side for balance. Able to choose the weight bracket to match various types of suitcase weights.
Oil Pressure Gauge	Easily monitor oil pressure for optimum performance of unit.
Pressure Relief Valve	Protects against high hydraulic fluid pressure.
Gauge Wheels Option	Deck floats on gauge wheels eliminating frequent deck positioning and vigilant watch for changes in ground contour under the tractor and/or deck.
SMV Mounting Socket (Standard) SMV Sign (Accessory)	SMV mounting socket receives most SMV signs equipped with a mounting blade for ease of attachment and removal when transporting on a truck or trailer. SMV sign is offered as an accessory when the tractor’s SMV sign and mounting blade does not fit the cutter’s standard SMV mounting socket.

Specifications

Specifications & Capacities	DBM2660
Tractor horsepower	75 Minimum hp.
Minimum tractor lift capacity	2,500 lbs
Minimum tractor weight	7,000 lbs without added weights
Weight	1,792 lbs (With front & rear chain guards, side gauge wheel, Ditch Bank mounted speed increaser, & Case weight hanger. Without fluid in reservoir)
Hitch type	Cat. ll or Cat. ll/lll Quick Hitch. Clevis style lower hitch.
Tractor power take-off speed	DB2660 = 540 rpm; DBM2660 = 1000 rpm
Cutting width	58"
Transport width, minimum	10' - 1" (without gauge wheels)
Overall width (fully retracted with optional weight bracket)	10' - 3 3/4"
Minimum cutting height (Deck level)	2" Minimum Maximum is dependent upon 3-point lift height.
Horizontal cutting extension	32"
Maximum horizontal reach from center of tractor	13'-2"
Deck rotation	85o up, 95o down
Blade tip speed	15,600 FPM
Number of blades & size	2, 1/2" x 4"
Blade rotation	Clockwise
Blade bolt	1 1/2" With keyway, harden flat washer, and locknut
Dishpan	3/16" X 21" Round, dish-shaped
Cutting capacity	1" Max.
Deck thickness	10 GA
Side skirt thickness	3/16"
Speed Increaser fluid capacity	NOTE: Refer to metal tag on speed increaser for vendor name (BIMA or Comer). Tractor mount, refer to Figure 6-4 on page 42. BIMA = 1 1/2 pints Comer = 2 pints Ditch Bank mount, refer to Figure 6-5 on page 42. BIMA = 2 pints Comer = 1 pint
Speed increaser fluid	80-90W EP Gearlube
Hydraulic fluid	Mobilfluid 424 For alternate fluids, search on the web for "Mobilfluid 424" or go to www.mobil.com
Reservoir capacity and filter	35 Gallons / conventional 10 micron filter
Method to check oil capacity	Dipstick
Hydraulic fluid flow rate	15 gpm (approx.)
Overload protection	Hydraulic relief valve
Driveline (optional)	ASAE category 4
Skid shoes	2 1/2" Wide x 1/4" thick & replaceable
Gauge wheel (optional)	4 x 8 Laminated tire with greasable caged roller bearings.
Gauge wheel adjustment	Manual
SMV Sign (Accessory)	SMV decal on galvanized steel back sign and plated or galvanized blade mount.