Land Pride AB84

New Products / Land Pride / Material Handling / AB Series Angle Brooms / AB84

Double tap to zoom

Features
Specifications

Features

Features	Benefits
32" Bristle diameter	Provides for long service life.
Available in 72" (183 cm) and 84" (213 cm) working widths	Provides for excellent productivity and ideal sizes for most skid steers and compact utility tractors.
Choice of poly or combination poly/wire bristles	Allows owner/operators to meet operational needs. Poly/wire combinations provide more wear life and more aggressive sweeping action.
Faceted hood design	Provides for a higher level of overall structural integrity.
Easily removable brush drive	Allows for quick and easy change out of brushes without motor removal or opening hydraulic lines.
Choice of manual or hydraulic angling	Allows owner/operators to meet budgetary and operational needs. High or Standard Flow hydraulic options are offered to ensure that cylinder travel response is safe and appropriately matched to output flow of the tractor.
Brush angles 30 degrees to the left or right	Provides for excellent material control and puts sweepings where the operator wants them.
Compatible with 12GPM to 25GPM hydraulic flow at 2,000 psi	Allows attachment to a wide range of skid steers and compatible compact utility tractors equipped with loader arms and skid steer adapter plates.
Integral flow control valve	Protects hydraulic system and motor from hydraulic inputs exceeding 25 gpm.
Integral float control design	Spring loaded adjustable down pressure control and stops prevent premature brush wear while providing appropriate surface contact with the rotary brush.
100 to 230 rpm brush rotation	Provides for good sweeping action and material control.
Integral storage stands	Enables easy dismount and storage and keeps bristle ends from becoming deformed by supporting weight of the unit.
Options
Rubber dust deflector flap	Helps keep dust levels under control and down and under the hood cowling and out of the operators field of vision.
Dust suppression system	Hood mounted spray boom and nozzles dispense a fine spray mist in front of the broom to control and minimize airborne dust particles.
Metal shroud extension	Extends the broom shroud further forward to help control dust. Spray nozzles can be mounted on the extension to help minimize airborne dust particles.
Marker indicators	Aids operator in knowing exact position of extreme left and right edges of the unit for safer and unencumbered operation.

Specifications

Model Number	AB84
Hitch	Skid steer quick attach, meets ISO 24410
Weight w/high flow set-up, hydraulic	930 lbs (421.8 kg)
Overall width	93 1/2" (2.37 m)
Overall height	33" (83.8 cm)
Wafer quantities	2 Straight Poly Wafers 40 Convoluted Wafers
Wafer	2 Straight Poly Wafers 40 Convoluted Wafers
Sweeping width	84" (2.13 m)
Sweeping width @ 30o max angle	76" (1.93 m)
Maximum angle	Manual Angling: 30 Degrees left or right Optional Hydraulic Angling: 30 Degrees left or right
Brush diameter	32" (81.3 m)
Brush rotor shaft	Quick change broom core with no hydraulic breakage in changeover
Hex drive system	Replaceable
Brush bristle type	100% Poly or 100% Metallic or 50% Poly and 50% Metallic
Hood	Sheet Metal
Jack stands	Standard
Float Control	Spring Loaded with adjustable down pressure and stops
Hydraulic gpm range	12-30 gpm (45.4-113.6 pm)
Motor rated hydraulic flow 18 CID motor 23 CID motor	18 gpm (68.1 lpm) @ 220 rpm brush speed (“High Flow” option not available.) 25 gpm (94.6 lpm) @ 230 rpm brush speed (“High Flow” option available for units capable of producing flows above 25 gpm (94.6 lpm). This option protects the hydraulic motor by diverting excess flow back to the tank.)
Minimum hydraulic flow required	12 gpm (45.4 lpm) @ 2000 PSI (13.79 MPa)
Maximum hydraulic pressure rating	3500 PSI (24.13 MPa)
Brush speed range	100 - 230 Rpm
Hydraulic rotor drive motor	Single motor drive standard
Hydraulic hoses	Standard for drive motor hook-up Optional with angling cylinder
Hydraulic couplers	Standard