Call UsLand Pride OFM3678
OFM36 Series Offset Flail Mowers OFM3678
Overview:
The OFM36 feature hammer knives with a 1" cut height and a 2.5" cut capacity. The unique float capabilities allow the mower to follow the terrain for an even cut on sloped surfaces. The reverse rotor rotation carries the cut material up and over the rotor, directing it downward to minimize thrown debris. The deck has a... + Read More
Features
| Features | Benefits |
| Multiple cutting widths 78", 90", & 98" (200, 230, & 250 cm) |
Wide selection of cutting widths to meet specific applications. |
| Wide range of tractor horsepower 75 hp to 130 hp (52 kW to 75 kW) |
Fits a large array of tractors to meet the needs of consumers, municipalities, and landscapers. |
| Spring-loaded, belt-tensioning system | Belt tensioner system brings the belt to proper tension by turning a jam nut. Makes maintaining proper belt tension easy, and increases belt life. |
| High blade cutting capacity | Hammer blade can cut up to 2" (5 cm) brush and small saplings |
| Reverse rotor rotation | Brings the cut material up and over the rotor which allows it to be dispersed more evenly. Allows material to be shredded completely. |
| High blade tip speed | Creates a vacuum effect, provides a clean cut, and slices through saplings with great force. |
| Five drive belts | Five drive belts distributes the load evenly, which prevents the belts from jumping off the drive when a shock load occurs. |
| Offsets right | The lateral arm allows the mower to be offset 49" (125 cm) to the right for a closer cut alongside buildings, fences, and roadsides. It also allows the mower to be cutting in a ditch with the tractor traveling along side the ditch. |
| Rotor housing can be rotated from horizontal to 65° up or down | Allows mowing along banks and in ditches without putting the tractor on steep inclining or declining surfaces. |
| Counter-blade (accessory) | Assist shredding material into fine particles. |
| Replaceable skid shoes | Prevents wear on end panels from ground contact. |
| Adjustable roller | Provides precision cutting height between 1" and 2 3/4" (25 cm to 70 cm). |
Specifications
| MODEL | OFM3678 |
| Horsepower | 75-130 HP |
| Min. Tractor Weight | 6,900 lbs. |
| Hitch | Cat. 2 |
| Weight - lb | 1,985 |
| Working Width | 78" |
| Transport Width (cm) | 8'4" (2.54m) |
| Rotor Shaft Speed | 1,858 RPM |
| Gearbox Rating | 540 RPM |
| Driveline | Cat. 3 |
| Offset Hitch | Right 49" |
| Rotate | 65° Down, 90° Up |
| Blade Tip Speed | 8,460 fpm |
| Hammer Blades - Qty | 26 |
| Rotor Diameter | 6.5" |
| Rotor Rotation | Reverse |
| Rotor Shaft Diameter | 2" |
| Rotor Swing Diameter | 18" |
| Min. Cutting Height | 1" |
| Cutting Capacity | 2" |
| Rear Roller Diameter | 7.5" |
| Hood/Deck Thickness | 8 Gauge |
| Skid Shoes | Replaceable |
