Land Pride BB4512

New Products / Land Pride / Dirtworking / BB45 Series Drag Scrapers / BB4512

Double tap to zoom

Features
Specifications

Features

FEATURES	BENEFITS
70 to 130 Hp range	Fits a wide variety of tractors.
4 x 4 Square tube cross beam	Square tubing is structurally strong. Helps keep the Drag Scraper square.
3/8" Heavy side panels with angle reinforcement on the diagonal	Built heavy to handle tough jobs and to keep the side panels straight under side loads.
1/4" Formed moldboard with internal brace bars and 3" x 3" x 3/8" angle reinforcement at the cutting edge	Formed moldboard helps keeps materials flowing, decreases drag, lowers horsepower requirements, and speeds up work. Brace bars extending from crossbeams to lower moldboard keep the moldboard straight under heavy loads. Angle reinforcement at the cutting edge helps keep the cutting edge straight.
Side Panels have vertical gussets at the front	Vertical gussets help keep the panels straight vertically under side loads.
1/2" x 6" Heat-treated, reversible and replaceable cutting blade	Heat-treated high carbon steel for hardness giving the cutting blade long life. Reversible so both edges can be used before replacing the cutting blades.
24" High moldboard and side panels	Has a high material capacity for doing a lot of work in a short time. BB4510 = 2 1/4 cu. yd. capacity and BB4512 = 2 3/4 cu. yd. capacity
5" Maximum cutting depth	Can load the bucket quickly.
21" Dump clearance	Capable of dumping a lot of material quickly.
Optional tilt allows blade point to drop on the right side	Capable of making deep angle cuts in one pass. See Specifications for actual depth of blade drop.
Optional weight tray	Weight tray can be filled with 760 lbs. of concrete to help force the cutting blade into the material.

Specifications

Specifications & Capacities
Model Numbers	Model BB4512
Horsepower rating	70 to 130 hp tractors.
Transport width	12' - 0 3/4"
Working width	12' - 0".
Capacity	2 3/4 cu. yds.
Weight with weight box Standard axle: Tilt axle:	Weights are without material in weight box 1,580 lbs. 1,700 lbs.
Weight of material in weight box	760 lbs. Level full with concrete
Depth of bucket	36" From front of side panel to cutting edge
Maximum cutting depth	5" Below grade
Dump clearance	21"
Maximum tilt depth to the right	8 1/4" Drop on blade point
Maximum tilt angle	3 1/2 Degrees
Tongue construction	4" x 4" Square tubing
Cross beam construction	4" x 4" Square tubing
Side panel construction	3/8" x 24" High x 40" deep with heavy angle reinforcement on the diagonal extending from lower front corner to upper back corner and corner gussets extending from cross beam to side panel
Moldboard construction	Break formed 1/4" x 24" high
Cutting blades	Reversible and replaceable 1/2" x 6" high carbon heat treated blade
Bucket reinforcement	5 Brace bars Brace bars extend from crossbeam to lower moldboard.
Cutting blade reinforcement	3" x 3"x 3/8" Angle iron welded to the moldboard
Tires	15" Recapped ribbed implement tires on new wheels
Maximum transport speed	20 mph
Lift cylinder	3" bore x 8" stroke
Tilt cylinder	3" bore x 8" stroke
Options
Hitch types	Clevis hitch, swivel clevis hitch, or swivel ball hitch
Axle types	Standard axle or tilt axle
Weight box	Available for standard axle and tilt axle