Land Pride BR310
![](/assets/Uploads/LandPride-BR310-21.jpg)
Features
Features | Benefits |
Oil fired | Oil fired units do not have a bladder of nitrogen that has to be re-filled. |
No tie rods | Tie rods can become loose and need tightening periodically |
Service interval = 1000 hrs. | The Hydraulic Breaker is built tough to last a long time between service intervals |
Higher impact rate, Up to 2600 bpm (bumps per minute) |
Able to complete the job faster than most machines. |
All models operate quiet | Each model has a lower operating noise level than the competitors |
Standard tools included: 1 moil point and 1 chisel point |
All hammers are shipped with two of the most heavily used tools to ensure the hammer is equipped to work. |
BR510, BR560, BR860 models have CBE (Constant blow energy) |
Constant energy throughout a given oil flow range means less drop off in effective energy with lower oil flow and pressures. |
Models with CBE span a larger hydraulic range | Fewer adjustments between power machines. |
Specifications
Specifications & Capacities | |
Model Numbers Unit | BR310 |
Frequency range2 bpm | 1300-2500 |
Oil flow range gpm (Lpm) | 3.9-8.7 (15-33) |
Operating pressure psi (bar) | 1450-1740 (100-120) |
Pressure relief setting minimum3 psi (bar) | 2170-2460 (150-170) |
Pressure relief setting maximum psi (bar) | |
Tool shank diameter in (mm) | 1.42 (36) |
Net weight4 lbs (kg) | 165 (75) |
Carrier weight5 ton (m ton) | .88-2 (0.8-1.8) |
Thread on valve housing | BSP 1/2" Female |