Land Pride TR60
![](/assets/Uploads/Landpride-KubotabyLP-TR60-2019.jpg)
Features
Features | Benefits |
Quality hydraulic motor available in two volume flows | Provides long life, durable construction. Two flow options allow the trencher to fit many skid steers. |
Reversible motor | Helps in areas where rocks may lodge and stop chain, can back out and try again. |
Boom ball bearings are selfcontained ball bearing with triplelip seals and metal shroud covers | Boom ball bearings are protected against dirt invasion and do not require greasing. |
Drive bearings are self-contained, single & double row ball bearings with extra heavy duty seals. | Drive bearings are protected against dirt invasion and do not require greasing. |
Motor case drain | Reduces back pressure at motor thus delivering more power for trenching. |
Hardened cup teeth | Increase life and productivity of the teeth. |
High tensile strength trencher chain | Chain stands up to rugged use. |
Trencher chain side links | Designed for anti-flex without binding or piggybacking. |
Full length bolts securing teeth with spacers at every station. | Helps to distribute load equally on both sides of the chain. Minimizes chain wear. |
Side shifts from center to 22" to the right | Allows the operator to get up close to buildings and fences. |
Grease cylinder chain tightener | Makes tightening the chain easy |
Connect under pressure hydraulic couplers | Couplers are easier to connect and disconnect. |
Removable spoil auger | Helps dig a trench closer to fences and buildings |
Floating crumber shoe | Improves the performance of the crumber shoe. |
Depth indicator (Patent-pending) | Helps the operator judge the depth of trench from the operator's seat. |
Numerous chain options | Plenty of options to choose from to match your local digging conditions. |
Heavy frame construction | Stands up to rugged use. (5/16" Thick hitch plate with 3/4" reinforced bar around three sides of the bottom lock pin slots.) |
TR48: 4' digging depth TR60: 5' digging depth | Customer can choose which trencher best suits his/her needs. |
221-373 fpm chain speed (Skid steer hydraulic flow and pressure ratings vary.) | Good operating speed to get the work done. |
Specifications
Model Number | TR60 |
Operating weight With 2 pitch cup chain and hydraulic side shift. | 1300 lbs (589.7 kg) |
Overall length | 102.5" (2.60 m) |
Standard boom length | 77.5" (1.97 m) |
Digging depth at 60 degrees | 5 ft (1.52 m) |
Frame width w/step | 61.13" (1.55 m) |
Overall width | 64" (1.63 m) |
Overall height | 34.1" (86.6 cm) |
Auger diameter | 15.5" (39.4 cm) |
Auger clearance | 28.5" - 30.5" (72.4 cm - 77.5 cm) |
Side shift options Manual Hydraulic |
Side shifts from center to 22" (55.9 cm) right of center Side shifts from center to 22" (55.9 cm) right of center |
Side shift travel | 22" (55.9 cm) |
Trenching widths available | 6", 8" & 10" (15.2 cm, 20.3 cm, 25.4 cm) |
Motor options | Low flow (LF) & high flow (HF) motors |
Hydraulic motor flow requirements Low flow High flow |
12-24 gpm (45.4-90.8 lpm) 24-40 gpm (90.8-151.4 lpm) |
Hydraulic motor pressure range Low flow High flow |
2400-4500 psi (16.55-31.03 MPa) 2000-3600 psi (13.79-24.82 MPa) |
Chain speed (Depending on skid steer flow & pressure ratings) Low flow High flow | 227-366 fpm (69-112 m/min) 221-373 fpm (67-114 m/min) |
Motor case drain | Standard |
Motor | Reversible |
Chain tightener | Grease Cylinder |
Crumber shoe | Floating |
Depth indicator (Patent-pending) | Standard (Viewable from operator seat) |
Roller guide bearings at boom head | Self-contained, ball bearings with triple-lip seals & metal shroud covers |
Drive bearings between motor & drive sprocket | Self-contained, single & double row ball bearings with extra heavy duty seals |
Spoil auger | Removable |
Hydraulic coupler options | Standard and large flat face, connect under pressure, couplers |
Chain options - numerous | Cup teeth on 2 or 4 pitch, scorpion w/cup teeth, or alligator w/cup teeth |
Step and step pads | Heavy-duty, cast steel |
Frame construction | Heavy duty 5/16" (8 mm) thick w/ 3/4" (19 mm) reinforced bar around three sides the bottom lock pin slots. |
Trencher chain | 2.00" (5.1 cm) Pitch. 50,000 lb (22679.6 kg) tensile strength |
Trencher chain side links | Anti-flex |
Cup teeth | Hardened with hard facing |