H&S 18 Wheels / NOT AVAILABLE

Double tap to zoom

 

Features

  • 5″ x 7″ Overhead Mainframe
  • Each side opens independently.
  • The windrow width on the HDII can be adjusted hydraulically to a maximum of 72″.
  • One hydraulic remote along with the electrical control box, controls all the functions of the rake.
  • Because of the offset of the rake wheel beams, there is no need for center kicker wheels.
  • Rake wheel ground pressure can be adjusted by the threaded rod and nut on the end of the lifting pipes on each rake beam.
  • The 60″ rake wheels on the HDII rake feature UV treated poly wind panels and an over center wheel stop.
  • Torsional dampening springs allow the rake wheels to roll smoothly over the terrain.
  • The rake wheel lift pipes slide in oil impregnated bronze bushings and also feature a rake wheel lock for transportation.
  • The HDII rake features rake beams with a variable adjustment to set the rake wheels straight or in a tilted setting up to 10 degrees. (patented)
  • Anti-wrap hay guards are standard equipment.
  • The rake wheels may be lifted independently left or right or both at the same time with the master switch.
  • An adjustable hitch and jack are standard equipment.
  • A ball hitch is optional.

Specifications

18 Wheels 
WHEEL DIAMETER 60″
TEETH PER WHEEL 38
TEETH Rubber Mounted in a set of 2
TRANSPORT WIDTH 13′ 3″
TRANSPORT LENGTH 30′ 9″
MAXIMUM RAKING WIDTH 31′ 3″
RAKE WHEEL HUBS TAPERED BEARINGS
HITCH JACK STANDARD
TAIL & WORK LIGHTS STANDARD
TIRES 9.5L X 15SL