Call UsH&S 6122 / NOT AVAILABLE
6100 Series Flex-Frame Rakes 6122
Features
- H&S Flex-Frame wheel rakes are available in 16, 18, 20, and 22 wheel models.
- The raking wheels are positioned ahead of the rake arms, main frame beams and transport wheels. coupled with a high and wide end of frame, there are no hang-up points or restrictions when raking the heaviest of hay crops.
- The rake beams and rake arms feature flex-joints for maximum flexibility over the terrain.
- A brake band on each front gauge wheels can be easily adjusted to field conditions.
- Large independent 60″ rake wheels with “Bee Hive” style spring suspension follow the contours of the ground smoothly.
- A large diameter rake wheel hub is used for added strength to the rake wheel dish.
- The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the Flex-Frame wheel rakes to fit varying conditions.
- The rake arms feature 2 ball bearings on each end of the arm for long life, smooth operation, and less wear than rakes with bushings.
- The 60″ diameter rake wheels turn slower for less tooth wear and deliver more capacity.
- Windrow width adjustment is made by a ratchet jack. A Hydraulic Rear Windrow Width Adjustment is Optional.
- Each rake beams articulates and flexes independently.
- Raking widths can be hydraulically adjusted in any position up to the pre-determined raking width. Setting the spring loaded stop allows you to set a pre-determined raking width.
- Rake wheel wind boards are standard on the Flex-Frame Rakes.
- Optional rear limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks.
- A center kicker wheel assembly is optional.
Specifications
| 6122 | |
| NUMBER OF WHEELS | 22 |
| WHEEL DIAMETER | 60″ |
| TEETH PER WHEEL | 40 |
| TOOTH DIAMETER | 7.5mm |
| RAKE WHEEL HUBS | Ball Bearings |
| RAKE WHEEL ANTI-WRAP SHIELDS | Standard |
| RAKE WHEEL SUSPENSION | Independent "Bee Hive" Spring |
| TRANSPORT WIDTH | 11′ 6″ |
| TRANSPORT LENGTH | 40′ 6″ |
| TRANSPORT HEIGHT IN TRANSPORT POSITION | N/A |
| MAXIMUM RAKING WIDTH | 41′ 6″ |
| WINDROW WIDTH ADJUSTMENT | 3′ TO 5′ |
| NUMBER OF RAKING POSITIONS | 6 |
| GROUND PRESSURE RAKE WHEEL ADJUSTMENT | Nut/Threaded Rod |
| RAKE WHEEL WIND PANELS | Standard |
| HYDRAULIC REAR WINDOW ADJUSTMENT | Optional |
| HITCH JACK | Standard |
| WEIGHT | 8521 lbs |
| CENTER KICKER WHEEL | Optional |
| HYDRAULIC REQUIREMENTS | 1 Double Acting Cylinder For Folding |
| FRONT GAUGE WHEELS | 4 - 11L X 15 |
| STANDARD SINGLE REAR TRANSPORT WHEELS | 2 - 11L X 15 |
| OPTIONAL TANDEM REAR TRANSPORT WHEELS | 4 - 11L X 15 |
| TRANSPORT LIGHTING | Optional |
