Land Pride RCR1884

New Products / Land Pride / Rotary Cutters / RCR1884 Rotary Cutters / RCR1884

Double tap to zoom

Features
Specifications

Features

Features	Benefits
Surpassed rugged industry standards	All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
90 Hp gearbox	A rugged heavy built gearbox capable of handling heavy cutting applications.
Cat. 4 drive-line with 2-plate slip-clutch	Slip-clutch drive-line offers convenience for continual work.
Cat I or Cat II Hitch Quick-Hitch Capability	Permits deck to follow the terrain for an even cut. Quick-Hitch provides for fast hook-up.
Lower clevis type 3-point hitch	Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
84" Cutting width	Wide cutting width, Reduces cutting time in the field.
Heavy 10 gauge deck construction	Can withstand more abuse than lighter gauge decks.
Box tubing deck supports	Makes for a stronger rigid deck.
Fully welded deck	Adds additional strength.
Extended cutter front	For increased material flow and added protection.
Round back design	Helps discharge grass better than enclosed or partially enclosed cutter.
9 1/2" Deck Height	Allows cutter to handle heavy cutting conditions.
2" to 11" Cutting height	Provides for a wide range of cutting conditions.
1/4" x 2 1/2" Full length skid shoes	Provides sidewall reinforcement and full protection to bottom of sidewall.
1/2" x 4" Heat-treated free swinging blades	Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub	Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
10 Gauge stump jumper	Standard oval stump jumper slides over stumps, rocks, and debris.
High blade tip speed	Ensures clean cut. (17,113 FPM)
2" Cutting capacity	Can aid in cleaning brush
Available with single or dual tailwheels	Dual tailwheels offer greater stability in uneven terrain.
15" Laminated tailwheel	Laminated material is long lasting in rough conditions.
Heavy-duty spindle on tailwheel	Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheel assembly.
Guarding	Protect against flying debris. Customer must choose to include chain or rubber on the front and rear. Rear Metal Band standard.
Drive-line Holder	Keeps drive-line up out of dirt. Easier hook up of drive-line.

Specifications

Machine Weight with Front Rubber Guard and Rear Metal Band)	851 lbs. without driveline
Hitch	Category l or Category II, Quick-Hitch Ready
Cutting Width	84"
Overall Width	89"
Overall Length with Tail Wheel	135 1/8"
Deck Height (Bottom of Deck to Bottom of Skid Shoe)	9 1/8"
Cutting Height	2" - 11"
Cutting Capacity	2" Diameter
Recommended Tractor Horsepower	45 - 90 horsepower
Power Take-Off Speed	540 rpm
Gearbox Horsepower Rating	90 horsepower
Gearbox	1:1.44 Speed-Up Beveled Gears with Cast Iron Housing
Gearbox Lubrication Capacity & Type	7 Pints of 80-90W EP Gear Lube
Gearbox Input/ Output Shaft Size	Input Shaft = 1 3/8" - 6 Spline Output Shaft = 2" Dia.
Deck Construction	All welded deck
Deck Material Thickness	10 Ga.
Skid Construction	Standard 1/4" x 2 1/2" welded on
Stump Jumper	Oval 10 ga. Pan
Blades (2)	1/2" x 4" Heat Treated Alloy Steel Free-Swinging High Lift - Low Friction
Blade Bolt	Keyed with harden flat washer and locknut
Blade Tip Speed	17,113 fpm
Driveline	ASAE Category 4
Driveline Protection	Slip Clutch
Tailwheel Mount Assembly	Welded arm and Caster Fork
Tailwheel	4" x 8" x 15" Laminated Tire
Front Guard	Optional: Rubber Guard or Chain Guard
Rear Guard	Standard: Metal Band Optional: Chain Guard