Land Pride RCF3096

New Products / Land Pride / Rotary Cutters / RCF3096 Series Rotary Cutters / RCF3096

Double tap to zoom

Features
Specifications

Features

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
540 or 1000 RPM	Fits wider variety of tractors.
High Gearbox HP rating	Gearboxes are built rugged.
3 Gearboxes	Allows equal torque to be spread to left and right gearbox.
Splined rubber flex-couplers between the center and outboard gearboxes	Protects the driveline and gearboxes from hard objects in the blade path.
Pull-type unit Constant velocity driveline	Reduces chatter and extends life of U-joint during turns.
Slip-clutch protection on main driveline	Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
8'- Cat. 1 & 2 or 10'- Cat. 2 & 3 3-Point & Semi-mount Hitches or Pull-type Hitch	Fits a wide range of tractors. Semi-mount and Pull-type fit older tractors without a top link and smaller tractors without enough lift capacity.
10 Gauge deck, fully welded	Fully welded deck adds rigidity.
1/4" Thick sidewalls	Protects sidewalls from thrown objects.
Round back design	Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out.
Pull-type w/dual leveling rods	Dual leveling rods eliminate deck twisting when going over uneven terrain.
Chain or rubber guard option	Reduces flying debris.
Full length skids with replaceable shoes	Adds reinforcement to side panels. Replaceable shoes allow for change before wearing through to weld-on piece.
Splined blade hub	Splined blade hub offers tight non-slipping attachment to output shaft.
3/16" Round stump jumper	Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
1" x 4" Blade bar	Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
1/2" x 4" Heat-treated blades	Heat-treated blades last longer than non-heat-treated blades.
2 1/2" Diameter cutting capacity	Aids in cutting brush.
High blade tip speed	Means cleaner cutting. See Specifications for actual blade tip speeds.
Laminated tires	Laminated tires can handle almost any condition and don't go flat.
Quick-Hitch adaptable	3-point and semi-mount are Quick-hitch adaptable.

Specifications

Model Numbers	RCF3096 (540 rpm)
Machine weight with front & rear rubber guards. Includes hydraulic cylinder & 21" wheels with semi-mount and pull type units	3-Point mount w/ 15" wheels = 1,587 lbs. Semi-mount =1,800 lbs. Pull-type = 1,976 lbs.
Hitch	3-Point & semi-mount Category 1 & 2 Quick Hitch Adaptable Pull-type - with dual self level rods
Pull type tongue weight	893 lbs.
Park jack	Park jack attaches to the tongue of the pull type cutter
Cutting width	8' - 0"
Overall width	8' - 7"
Overall length 3-point mounted semi-mounted pull-type	8' - 6" 9' - 5" 12' - 5"
Deck height	11 1/4"
Cutting height	2" - 12"
Cutting capacity	2 1/2"
Tractor Hp rating	Lift-type - 50 - 110 Pull/semi - 40 - 110
Gearbox horsepower rating	T-box - 160 hp, outboard 110 hp
Gearbox	540 rpm gearbox Cast iron housing, beveled gears
Gearbox input / output shaft size	Input shaft = 1 3/4" - 20 spline Output shaft = 2" dia.
Gearbox lubrication	80-90w EP gear lube
Gearbox oil capacity end boxes T-box	Comer = 6 pints Comer = 4.5 pints
Deck material thickness	10 gauge
Deck side skirt thickness	1/4"
Skids	Replaceable
Stump jumper	2 ea. - 3/16" Round pan
Blades (4)	1/2" x 4" Heat treated Free-swinging suction blades
Blade bolts	Keyed with harden flat washer and locknut
Blade tip speed	540 rpm 16,360 fpm
Driveline 3-point & semi-mount pull type	ASAE Cat 4 ASE Cat. 4 equal angle shaft or constant velocity u-joint
Driveline protection	540 rpm - 4 plate slip clutch Rubber flex coupler to wing boxes
Tailwheel options 3-point without rear axle: 2 tires 3-point with rear axle: 2 tires semi-mount: 2 tires pull-type w/single spindle: 2 tires pull-type w/dual spindles: 4 tires	4" x 8" x 15 1/4" Caster laminated 4" x 8" x 15 1/4" Caster laminated or 6" x 9" x 21" caster laminated 4" x 8" x 15 1/4" Caster laminated or 6" x 9" x 21" caster laminated 6" x 9" x 21" Laminated or 24" x 7.7" recap foam filled aircraft or 29" x 16 ply aircraft 6" x 9" x 21" Laminated or 24" x 7.7" recap foam filled aircraft or 29" x 16 ply aircraft
Wheel bearings	Tapered roller bearing in cast iron hub
Shock absorption	Spring shock absorber on axle of semi-mount & pull type
Front guard	Optional: Rubber deflector, single chain guard, or double chain guard
Rear guard	Optional: Rubber deflector, single chain guard, or double chain guard