Land Pride RCF2084

New Products / Land Pride / Rotary Cutters / RCF2084 Rotary Cutters / RCF2084

Double tap to zoom

Features
Specifications

Features

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
Gearbox Seal Protection	Gearbox bottom seal protection for longer bearing life.
Cat. 4 drive-line with 2-plate slip-clutch	Slip-clutch drive-line offers convenience for continual work.
Dual position clevis type 3-Point floating top link	Permits deck to follow the terrain for an even cut.
Lower clevis type 3-Point hitch	Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck & side skirt construction	Can withstand more abuse than lighter gauge decks.
Box tubing deck supports	Makes for a stronger rigid deck.
Fully welded deck	Adds additional strength.
Extended cutter front	For increased material flow and added protection.
Round back design	Helps discharge grass better than enclosed or partially enclosed cutters.
11 15/16" Deck Height	Allows cutter to handle heavy cutting conditions.
1 1/2" to 12" Cutting height	Provides for a wide range of cutting conditions.
Full length skid shoes	Provides sidewall reinforcement and full protection to bottom of sidewall.
1/2" x 4" Heat-treated free swinging blades	Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub	Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" x 27" Oval stump jumper	Standard Oval stump jumper slides over stumps, rocks and debris.
High blade tip speed	Ensures clean cut.
15" Laminated tail-wheel	Laminated material is long lasting in rough conditions. Can't go flat.
1 1/4" Heavy-duty spindle on tail-wheel	Tail-wheels take a beating, spindle gives the strength to protect tail-wheel assembly.
Optional Front Guarding	Protect against flying debris. Customer can choose to include single chain or rubber guarding.
Optional Rear Guarding	Protect against flying debris. Rear Metal Band is standard. Customer can choose to include single chain guarding.
Drive-line Holder	Keeps drive-line up out of dirt. Easier hook up of drive-line.

Specifications

Specifications & Capacities
Machine Weight: Single Tail-wheel Dual Tail-wheel	1,047 lbs. with Front Rubber Guard and Rear Metal Band. 1,155 lbs. with Front Rubber Guard and Rear Metal Band.
Hitch	Category l & II with floating top linkage, Quick Hitch ready
Cutting Width	84"
Overall Width	89"
Overall Length: Single Tail-wheel Dual Tail-wheel	133 1/4" 126"
Deck Height (Bottom of Deck to Bottom of Skid Shoe)	11 15/16"
Cutting Height	1 1/2" to 12"
Cutting Capacity	2" Diameter
Recommended tractor hp	45-90 hp
Power take-off speed	540 rpm
Gearbox Ratio	1:1.44
Gearbox Construction	Speed-up beveled gears, cast iron housing, 1 3/8"-6 spline input shaft and 2" output shaft
Gearbox Oil Capacity & Type	7 Pints of EP 80-90W oil
Deck Construction	All welded deck
Deck Material Thickness	10 Gauge (.134")
Side Skirt Material Thickness	10 Gauge (.134")
Skid Shoes: Standard Accessory	Full length weld-on skid shoes 1/4" x 2 1/2" x 18 7/16" Long bolt-on replaceable skid shoes (Bolts to weld-on skid shoes)
Stump Jumper	3/16" x 27" Oval Pan with 1" thick blade holder bar
Blades (2)	1/2" x 4" x 31" Heat treated alloy steel free-swinging high lift
Blade Bolts	Keyed with harden flat washers & lock nuts.
Blade Tip Speed	17,113 FPM
Drive-line	ASAE Category 4
Drive-line Protection	2 Plate slip clutch
Tail-wheel Mount	Welded A-arm and caster fork with 360 degree swivel
Tail-wheel	4" x 8" x 15" Laminated tire with cast iron hub
Front Guard: Optional Optional	Rubber Belting Single Chain Guard
Rear Guard: Standard Optional	Metal Band Single Chain Guard