Land Pride HD25

New Products / Land Pride / Dirtworking / HD25 Series Post Hole Diggers / HD25

Double tap to zoom

Features
Specifications

Features

FEATURES	BENEFITS
3-Point Cat. 1 or 2 Hitch	Fits a wider variety of tractors by fitting Cat. 1 & 2.
Bucket Mount Option	Easily bolt mounting plate to the side of the front loader bucket, and use the bucket to help push the auger into the ground
3-Point yoke: 2 7/8" O.D.	3/16" wall thickness for strength and durability.
3-Point boom: Reinforced 3 1/2" O.D.	7/32" Wall thickness reinforced with 3/8" x 2" bar makes for a strong boom.
Large selection of augers	Variety of Dirt Auger and Rock Auger sizes and styles to suit many applications.
Large selection of Bolt-on Rock Heads (accessory)	All sizes of Land Pride HD25 and HD35 Pengo Dirt Augers can be converted to Rock Augers with this accessory.
Auger flighting	Constant thickness on 1/4" flighting vs. tapered.
Replaceable cast alloy steel point with 3 fishtail tips	3 Fishtail tips will last 50% longer than 2 tips. Cast alloy steel point can easily be replaced when worn or damaged.
Replaceable dual angle teeth	Dual angle teeth can be changed from 40° to 50° to increase attack angle. Teeth can easily be replaced when worn or damaged.
25 Series	Use with hydraulic systems that pump at 5 –12 GPM, at 1500 – 3500 PSI.
35 Series	Use with hydraulic systems that pump at 10-25 GPM, at 1500 – 3500 PSI.
2" Output shaft	2" Handles torque loads that can be transmitted from hard ground. Fairly standard size for the industry, fits many competitive augers.
Hydraulic hose	Standard on 3-point Post Hole Diggers and skid/loader mount Post Hole Diggers. Optional on bucket mount Post Hold Diggers due to distance varying on tractor models.
6", 9", 12", & 18" Diameter auger options	Wide range of auger diameters to choose from.
48" Auger Length	Auger is provided in industry standard length.

Specifications

Specifications & Capacities
Models	HD25
Mount Type	3- Point Mount \| Skid/Loader Mount \| Bucket Mount Cat 1 or II
Hitch type	3- Point Mount \| Skid/Loader Mount \| Bucket Mount Cat 1 or II
Hydraulic hoses	Standard \| Standard \| Optional
Auger drive	Hydraulic
Gallons per minute rating	5 -12 gpm @ 1500 to 3500 PSI (18.9-45.4 Lpm @ 103-241 Bar
Max torque @ 2500 PSI	700 ft-lbs
Maximum auger rpm	101 rpm
Weight with 6" auger	235 lbs (107 Kg \| 268 lbs (22 kg) \| 170 lbs (77 kg)
Gearbox	3.18:1 Ratio
Gearbox oil capacity and type	4.7 Pints (2.22 L) of gear lube 80-90W EP
Output shaft on gearbox	2" O.D. round
Yoke	2 7/8" O.D. \| Not applicable \| Not applicable
Boom	Reinforced 3 1/2" O.D. \| Not applicable \| Not applicable
Options
Dirt Auger diameters	6", 9", 12", 15", or 18" (15, 23, 31, 38, & 46 cm)
Rock Auger diameters	6", 9", 12", 15", or 18" (15, 23, 31, 38, & 46 cm)
Tree Auger diameter	24" (61 cm)
Auger teeth	Individually replaceable (Pengo teeth only: 40o angle on flat side or 50o angle on sloped side)
Number of teeth	6" - 2 teeth, 9" - 2 or 4 teeth, 12" - 4 teeth, 15" - 5 teeth, 18" - 6 teeth, and 24" - 10 teeth
Auger Pilot	Cast steel with two or three drill points
Auger length	"Dirt and Tree Augers: 48"" (122 cm)
Rock Augers: 45"" (114 cm)"
Auger pipe	2 1/2" dia. (6.4 cm)
Auger flighting thickness	1/4" (6 mm)
Accessories
7" (18 cm) Auger Extension	Available, Weight = 9 lbs (4 kgs)
14" (36 cm) Auger Extension	Available, Weight = 15 lbs (7 kgs)
Hex Auger Adapter	Available, Weight = 12.4 lbs (5.6 kg) 2" (5.1 cm) Round hub to 2" (5.1 cm) hex shaft
Bolt-on Rock Heads	Available in 6", 9", 12", 15", or 18" diameters
Skid/Loader Quick Hitch Mount	N/A \| Available \| N/A
PD storage stand	Available \| N/A \| N/A
Hydraulic Down Pressure Kit	Available \| N/A \| N/A